Low‐Temperature Nanosecond Laser Process of HZO‐IGZO FeFETs toward Monolithic 3D System on Chip Integration
Advanced Science · 2024-07 · 11 (28)
DOI: 10.1002/advs.202401250 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 13.05.2024. Verfasst von Dongsu Kim und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical Engineering and Computer Science, Daegu Gyeongbuk Institute of Science & Technology (DGIST), Daegu, 42988, South Korea. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and ICT, South Korea, Samsung Electronics, Samsung.
Abstract (Originalsprache)
Ferroelectric field‐effect transistors (FeFETs) are increasingly important for in‐memory computing and monolithic 3D (M3D) integration in system‐on‐chip (SoC) applications. However, the high‐temperature processing required by most ferroelectric memories can lead to thermal damage to the underlying device layers, which poses significant physical limitations for 3D integration processes. To solve this problem, the study proposes using a nanosecond pulsed laser for selective annealing of hafnia‐based FeFETs, enabling precise control of heat penetration depth within thin films. Sufficient thermal energy is delivered to the IGZO oxide channel and HZO ferroelectric gate oxide without causing thermal damage to the bottom layer, which has a low transition temperature ( 10 6 s) are achieved in the ferroelectric HZO film. The resulting FeFET exhibited a wide memory window (>1.7 V) with a high on/off ratio (>10 5 ). In addition, moderate ferroelectric properties (2·P r of 14.7 µC cm −2 ) and pattern recognition rate‐based linearity (potentiation: 1.13, depression: 1.6) are obtained. These results demonstrate compatibility in HZO FeFETs by specific laser annealing control and thin‐film layer design for various structures (3D integrated, flexible) with neuromorphic applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electrical Engineering and Computer Science, Daegu Gyeongbuk Institute of Science & Technology (DGIST), Daegu, 42988, South Korea.
- Department of Engineering, Institute for Manufacturing, University of Cambridge, Cambridge, CB3 0FS, United Kingdom.
- Department of Robotics and Mechatronics Engineering, Daegu Gyeongbuk Institute of Science & Technology (DGIST), Daegu, 42988, South Korea.
ORCID-Profile: Dongsu Kim, Heejae Jeong, Goeun Pyo, Su Jin Heo, Seunghun Baik, Seonhyoung Kim, Hong Soo Choi, Hyuk-Jun Kwon, Jae Eun Jang
Förderung
- Ministry of Science and ICT, South Korea
- Samsung Electronics
- Samsung
Zitieren
APA
Kim, D., Jeong, H., Pyo, G., Heo, S. J., Baik, S., Kim, S., Choi, H. S., Kwon, H. J., & Jang, J. E. (2024). Low‐Temperature Nanosecond Laser Process of HZO‐IGZO FeFETs toward Monolithic 3D System on Chip Integration. Advanced Science, 11(28). https://doi.org/10.1002/advs.202401250
Vancouver
Kim D, Jeong H, Pyo G, Heo SJ, Baik S, Kim S, et al. Low‐Temperature Nanosecond Laser Process of HZO‐IGZO FeFETs toward Monolithic 3D System on Chip Integration. Advanced Science. 2024;11(28). doi:10.1002/advs.202401250
BibTeX
@article{Kim2024,
author = {Kim, Dongsu and Jeong, Heejae and Pyo, Goeun and Heo, Su Jin and Baik, Seunghun and Kim, Seonhyoung and Choi, Hong Soo and Kwon, Hyuk-Jun and Jang, Jae Eun},
title = {Low‐Temperature Nanosecond Laser Process of HZO‐IGZO FeFETs toward Monolithic 3D System on Chip Integration},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {28},
doi = {10.1002/advs.202401250}
}
EUVIMED