EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wearable All‐Fabric Hybrid Energy Harvester to Simultaneously Harvest Radiofrequency and Triboelectric Energy

Zhenghao Kou iD, Chao Zhang, Buyun Yu, Hao Chen, Zhenguo Liu iD, Weibing Lu

Advanced Science · 2024-05 · 11 (17)

DOI: 10.1002/advs.202309050 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 21.02.2024. Verfasst von Zhenghao Kou und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Millimeter Waves, School of Information Science and Engineering, Southeast University, Nanjing, 210096, P. R. China. Die Arbeit wurde bisher 76-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Fund for Distinguished Young Scholars of China, Key Program of the National Natural Science Foundation of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Distributed micro‐energy harvesting devices offer the flexibility, sustainability, and multi‐scenario applicability that will be critical to wearable electronic products in the Internet of Things. The radiofrequency and triboelectric (RF‐TE) hybrid energy harvester (HEH) concept and prototype is presented for the first time, to simultaneously capture the energy from ambient electromagnetic waves and biological motions. The proposed hybrid energy harvesting system consists of a wearable rectenna, a triboelectric nanogenerator (TENG), and a power management circuit (PMC). Among them, the all‐fabric rectenna exhibits good impedance matching characteristics in the ISM frequency. The flexible TENG unit can generate a maximum power density of 0.024 µW cm −2 . The designed multifunctional fabric‐based PMC can considerably enhance the controllability of harvested hybrid energy. Additionally, a normalizable fabric circuit board quasi surface mount technology (FCB‐SMT) is proposed to integrate all modules on the same fabric substrate in one step, making the entire system superior mechanical robustness. The proposed wearable fabric‐based RF‐TE hybrid energy harvester is capable of successfully driving consumer electronics (such as sensors, watches, etc.). It provides a new energy solution strategy for self‐powered wearable electronic devices and is anticipated to encourage the efficient utilization of renewable energy.

Schlagwörter

Stichwörter der Autor:innen

FCB‐SMThybrid energy harvesterpower managementrectennatriboelectric nanogenerator

Autor:innen und Institutionen

  • State Key Laboratory of Millimeter Waves, School of Information Science and Engineering, Southeast University, Nanjing, 210096, P. R. China.
  • Center for Flexible RF Technology, Southeast University, Nanjing, 210096, P. R. China.
  • Purple Mountain Laboratories, Nanjing, 210096, P. R. China.

ORCID-Profile: Zhenghao Kou, Zhenguo Liu

Förderung

  • National Science Fund for Distinguished Young Scholars of China
  • Key Program of the National Natural Science Foundation of China
  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Kou, Z., Zhang, C., Yu, B., Chen, H., Liu, Z., & Lu, W. (2024). Wearable All‐Fabric Hybrid Energy Harvester to Simultaneously Harvest Radiofrequency and Triboelectric Energy. Advanced Science, 11(17). https://doi.org/10.1002/advs.202309050

Vancouver

Kou Z, Zhang C, Yu B, Chen H, Liu Z, Lu W. Wearable All‐Fabric Hybrid Energy Harvester to Simultaneously Harvest Radiofrequency and Triboelectric Energy. Advanced Science. 2024;11(17). doi:10.1002/advs.202309050

BibTeX
@article{Kou2024,
  author = {Kou, Zhenghao and Zhang, Chao and Yu, Buyun and Chen, Hao and Liu, Zhenguo and Lu, Weibing},
  title = {Wearable All‐Fabric Hybrid Energy Harvester to Simultaneously Harvest Radiofrequency and Triboelectric Energy},
  journal = {Advanced Science},
  year = {2024},
  volume = {11},
  number = {17},
  doi = {10.1002/advs.202309050}
}
Kostenlos starten →