EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Constructing Multiphase‐Induced Interfacial Polarization to Surpass Defect‐Induced Polarization in Multielement Sulfide Absorbers

Shengchong Hui, Xu Zhou, Limin Zhang, Hongjing Wu

Advanced Science · 2024-02 · 11 (6)

DOI: 10.1002/advs.202307649 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 03.12.2023. Verfasst von Shengchong Hui und 3 weiteren Autor:innen. Beteiligte Einrichtung: MOE Key Laboratory of Material Physics and Chemistry under Extraordinary, School of Physical Science and Technology, Northwestern Polytechnical Unive…. Die Arbeit wurde bisher 143-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation of China, Fundamental Research Funds for the Central Universities, Natural Science Basic Research Plan in Shaanxi Province of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The extremely weak heterointerface construction of high‐entropy materials (HEM) hinders them being the electromagnetic wave (EMW) absorbers with ideal properties. To address this issue, this study proposes multiphase interfacial engineering and results in a multiphase‐induced interfacial polarization loss in multielement sulfides. Through the selection of atoms with diverse reaction activities, the multiphase interfacial components of CuS (1 0 5), Fe 0.5 Ni 0.5 S 2 (2 1 0), and CuFe 2 S 3 (2 0 0) are constructed to enhance the interfacial polarization loss in multielement Cu‐based sulfides. Compared with single‐phase high‐entropy Zn‐based sulfides (ZnFeCoNiCr‐S), the multiphase Cu‐based sulfides (CuFeCoNiCr‐S) possess optimized EMW absorption properties (effective absorption bandwidth (EAB) of 6.70 GHz at 2.00 mm) due to the existence of specific interface of CuS (1 0 5)/CuFe 2 S 3 (2 0 0) with proper EM parameters. Furthermore, single‐phase ZnFeCoNiCr‐S into FeNi 2 S 4 (3 1 1)/(Zn, Fe)S (1 1 1) heterointerface through 400 °C heat‐treated is decomposed. The EMW absorption properties are enhanced by strong interfacial polarization (EAB of 4.83 GHz at 1.45 mm). This work reveals the reasons for the limited EMW absorption properties of high‐entropy sulfides and proposes multiphase interface engineering to improve charge accumulation and polarization between specific interfaces, leading to the enhanced EMW absorption properties.

Schlagwörter

Stichwörter der Autor:innen

electromagnetic wave absorptionhigh-entropy materialsinterfacial polarizationmultiphase interfacial engineering

Autor:innen und Institutionen

  • MOE Key Laboratory of Material Physics and Chemistry under Extraordinary, School of Physical Science and Technology, Northwestern Polytechnical University, Xi'an, 710072, P. R. China.

Förderung

  • National Science Foundation of China
  • Fundamental Research Funds for the Central Universities
  • Natural Science Basic Research Plan in Shaanxi Province of China
  • Key laboratory of Icing and Anti/De-icing of CARDC
  • National Natural Science Foundation of China

Zitieren

APA

Hui, S., Zhou, X., Zhang, L., & Wu, H. (2024). Constructing Multiphase‐Induced Interfacial Polarization to Surpass Defect‐Induced Polarization in Multielement Sulfide Absorbers. Advanced Science, 11(6). https://doi.org/10.1002/advs.202307649

Vancouver

Hui S, Zhou X, Zhang L, Wu H. Constructing Multiphase‐Induced Interfacial Polarization to Surpass Defect‐Induced Polarization in Multielement Sulfide Absorbers. Advanced Science. 2024;11(6). doi:10.1002/advs.202307649

BibTeX
@article{Hui2024,
  author = {Hui, Shengchong and Zhou, Xu and Zhang, Limin and Wu, Hongjing},
  title = {Constructing Multiphase‐Induced Interfacial Polarization to Surpass Defect‐Induced Polarization in Multielement Sulfide Absorbers},
  journal = {Advanced Science},
  year = {2024},
  volume = {11},
  number = {6},
  doi = {10.1002/advs.202307649}
}
Kostenlos starten →