Additively Manufactured Zn‐2Mg Alloy Porous Scaffolds with Customizable Biodegradable Performance and Enhanced Osteogenic Ability
Advanced Science · 2024-02 · 11 (5)
DOI: 10.1002/advs.202307329 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 07.12.2023. Verfasst von Xuan Wang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Postgraduate Training Base, Jinzhou Medical University and The Fourth Medical Centre, Chinese PLA General Hospital, Beijing, 100048, China. Hauptthemen laut MEDLINE: Tissue Scaffolds, Osteogenesis. Die Arbeit wurde bisher 52-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Beijing Natural Science Foundation, Exploration project to improve the quality of standardized training for resident doctors in 2022, Health Care Project in 2022.
Abstract (Originalsprache)
The combination of bioactive Zn‐2Mg alloy and additively manufactured porous scaffold is expected to achieve customizable biodegradable performance and enhanced bone regeneration. Herein, Zn‐2Mg alloy scaffolds with different porosities, including 40% (G‐40‐2), 60% (G‐60‐2), and 80% (G‐80‐2), and different unit sizes, including 1.5 mm (G‐60‐1.5), 2 mm (G‐60‐2), and 2.5 mm (G‐60‐2.5), are manufactured by a triply periodic minimal surface design and a reliable laser powder bed fusion process. With the same unit size, compressive strength (CS) and elastic modulus (EM) of scaffolds substantially decrease with increasing porosities. With the same porosity, CS and EM just slightly decrease with increasing unit sizes. The weight loss after degradation increases with increasing porosities and decreasing unit sizes. In vivo tests indicate that Zn‐2Mg alloy scaffolds exhibit satisfactory biocompatibility and osteogenic ability. The osteogenic ability of scaffolds is mainly determined by their physical and chemical characteristics. Scaffolds with lower porosities and smaller unit sizes show better osteogenesis due to their suitable pore size and larger surface area. The results indicate that the biodegradable performance of scaffolds can be accurately regulated on a large scale by structure design and the additively manufactured Zn‐2Mg alloy scaffolds have improved osteogenic ability for treating bone defects.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Postgraduate Training Base, Jinzhou Medical University and The Fourth Medical Centre, Chinese PLA General Hospital, Beijing, 100048, China.
- Department of Stomatology, the Fourth Medical Centre, Chinese PLA General Hospital, Beijing, 100048, China.
- State Key Laboratory of Tribology in Advanced Equipment, Beijing, 100084, China.
- Department of Mechanical Engineering, Tsinghua University, Beijing, 100084, China.
- Senior Department of Orthopedics, the Fourth Medical Centre, PLA General Hospital, Beijing, 100048, China.
- Beijing Engineering Research Center of Orthopedics Implants, Beijing, 100048, China.
ORCID-Profile: Peng Wen
Förderung
- National Natural Science Foundation of China
- Beijing Natural Science Foundation
- Exploration project to improve the quality of standardized training for resident doctors in 2022, Health Care Project in 2022
- PLA General Hospital New Business Support Project
- Beijing Science Nova Program
- Capital clinical diagnosis and treatment technology research and transformation application project
- Key Military Medical Projects
- Natural Science Foundation of Beijing Municipality
Zitieren
APA
Wang, X., Liu, A., Zhang, Z., Hao, D., Liang, Y., Dai, J., Jin, X., Deng, H., Zhao, Y., Wen, P., & Li, Y. (2024). Additively Manufactured Zn‐2Mg Alloy Porous Scaffolds with Customizable Biodegradable Performance and Enhanced Osteogenic Ability. Advanced Science, 11(5). https://doi.org/10.1002/advs.202307329
Vancouver
Wang X, Liu A, Zhang Z, Hao D, Liang Y, Dai J, et al. Additively Manufactured Zn‐2Mg Alloy Porous Scaffolds with Customizable Biodegradable Performance and Enhanced Osteogenic Ability. Advanced Science. 2024;11(5). doi:10.1002/advs.202307329
BibTeX
@article{Wang2024,
author = {Wang, Xuan and Liu, Aobo and Zhang, Zhenbao and Hao, Dazhong and Liang, Yijie and Dai, Jiabao and Jin, Xiang and Deng, Huanze and Zhao, Yantao and Wen, Peng and Li, Yanfeng},
title = {Additively Manufactured Zn‐2Mg Alloy Porous Scaffolds with Customizable Biodegradable Performance and Enhanced Osteogenic Ability},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {5},
doi = {10.1002/advs.202307329}
}
EUVIMED