Engineering the Electrical and Optical Properties of WS 2 Monolayers via Defect Control
Advanced Science · 2024-01 · 11 (4)
DOI: 10.1002/advs.202305162 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Advanced Science, online erschienen am 27.11.2023. Verfasst von Michele Giovanni Bianchi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Science and Technology, Politecnico di Torino, corso Duca degli Abruzzi 24, Torino, 10129, Italy. Die Arbeit wurde bisher 80-mal zitiert (Crossref) und nennt 149 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Two‐dimensional (2D) materials as tungsten disulphide (WS 2 ) are rising as the ideal platform for the next generation of nanoscale devices due to the excellent electric‐transport and optical properties. However, the presence of defects in the as grown samples represents one of the main limiting factors for commercial applications. At the same time, WS 2 properties are frequently tailored by introducing impurities at specific sites. Aim of this review paper is to present a complete description and discussion of the effects of both intentional and unintentional defects in WS 2 , by an in depth analysis of the recent experimental and theoretical investigations reported in the literature. First, the most frequent intrinsic defects in WS 2 are presented and their effects in the readily synthetized material are discussed. Possible solutions to remove and heal unintentional defects are also analyzed. Following, different doping schemes are reported, including the traditional substitution approach and innovative techniques based on the surface charge transfer with adsorbed atoms or molecules. The plethora of WS 2 monolayer modifications presented in this review and the systematic analysis of the corresponding optical and electronic properties, represent strategic degrees of freedom the researchers may exploit to tailor WS 2 optical and electronic properties for specific device applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Applied Science and Technology, Politecnico di Torino, corso Duca degli Abruzzi 24, Torino, 10129, Italy.
ORCID-Profile: Michele Giovanni Bianchi, Francesca Risplendi, Michele Re Fiorentin, Giancarlo Cicero
Zitieren
APA
Bianchi, M. G., Risplendi, F., Re Fiorentin, M., & Cicero, G. (2024). Engineering the Electrical and Optical Properties of WS 2 Monolayers via Defect Control. Advanced Science, 11(4). https://doi.org/10.1002/advs.202305162
Vancouver
Bianchi MG, Risplendi F, Re Fiorentin M, Cicero G. Engineering the Electrical and Optical Properties of WS 2 Monolayers via Defect Control. Advanced Science. 2024;11(4). doi:10.1002/advs.202305162
BibTeX
@article{Bianchi2024,
author = {Bianchi, Michele Giovanni and Risplendi, Francesca and Re Fiorentin, Michele and Cicero, Giancarlo},
title = {Engineering the Electrical and Optical Properties of WS 2 Monolayers via Defect Control},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {4},
doi = {10.1002/advs.202305162}
}
EUVIMED