Phase Change Materials Meet Microfluidic Encapsulation
Advanced Science · 2024-10 · 11 (37)
DOI: 10.1002/advs.202304580 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Advanced Science, online erschienen am 14.11.2023. Verfasst von Yanhong Guo und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Advanced Study, Shenzhen University, Shenzhen, 518060, China. Die Arbeit wurde bisher 54-mal zitiert (Crossref) und nennt 155 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation, Zhejiang Provincial Department of Science and Technology.
Abstract (Originalsprache)
Improving the utilization of thermal energy is crucial in the world nowadays due to the high levels of energy consumption. One way to achieve this is to use phase change materials (PCMs) as thermal energy storage media, which can be used to regulate temperature or provide heating/cooling in various applications. However, PCMs have limitations like low thermal conductivity, leakage, and corrosion. To overcome these challenges, PCMs are encapsulated into microencapsulated phase change materials (MEPCMs) capsules/fibers. This encapsulation prevents PCMs from leakage and corrosion issues, and the microcapsules/fibers act as conduits for heat transfer, enabling efficient exchange between the PCM and its surroundings. Microfluidics‐based MEPCMs have attracted intensive attention over the past decade due to the exquisite control over flow conditions and size of microcapsules. This review paper aims to provide an overview of the state‐of‐art progress in microfluidics‐based encapsulation of PCMs. The principle and method of preparing MEPCM capsules/fibers using microfluidic technology are elaborated, followed by the analysis of their thermal and microstructure characteristics. Meanwhile, the applications of MEPCM in the fields of building energy conservation, textiles, military aviation, solar energy utilization, and bioengineering are summarized. Finally, the perspectives on MEPCM capsules/fibers are discussed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Advanced Study, Shenzhen University, Shenzhen, 518060, China.
- Research Group for Fluids and Thermal Engineering, University of Nottingham Ningbo China, Ningbo, Zhejiang, 315104, China.
- Department of Mechanical, Materials and Manufacturing Engineering, University of Nottingham Ningbo China, Ningbo, Zhejiang, 315104, China.
- Nottingham Ningbo China Beacons of Excellence Research and Innovation Institute, University of Nottingham Ningbo China, Ningbo, Zhejiang, 315104, China.
- Department of Electrical and Electronic Engineering, University of Nottingham Ningbo China, Ningbo, Zhejiang, 315104, China.
- Faculty of Engineering, University of Nottingham, Nottingham, NG7 2RD, UK.
ORCID-Profile: Sheng Yan
Förderung
- National Natural Science Foundation of China
- Guangdong Basic and Applied Basic Research Foundation
- Zhejiang Provincial Department of Science and Technology
- Ningbo Science and Technology Innovation
- European Commission ThermaSMART
- Nottingham Ningbo China Beacons of Excellence Research and Innovation Institute
Zitieren
APA
Guo, Y., Hou, T., Wang, J., Yan, Y., Li, W., Ren, Y., & Yan, S. (2024). Phase Change Materials Meet Microfluidic Encapsulation. Advanced Science, 11(37). https://doi.org/10.1002/advs.202304580
Vancouver
Guo Y, Hou T, Wang J, Yan Y, Li W, Ren Y, et al. Phase Change Materials Meet Microfluidic Encapsulation. Advanced Science. 2024;11(37). doi:10.1002/advs.202304580
BibTeX
@article{Guo2024,
author = {Guo, Yanhong and Hou, Tuo and Wang, Jing and Yan, Yuying and Li, Weihua and Ren, Yong and Yan, Sheng},
title = {Phase Change Materials Meet Microfluidic Encapsulation},
journal = {Advanced Science},
year = {2024},
volume = {11},
number = {37},
doi = {10.1002/advs.202304580}
}
EUVIMED