EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Design Strategies for Anodes and Interfaces Toward Practical Solid‐State Li‐Metal Batteries

Gabin Yoon, Sewon Kim, Ju-Sik Kim iD

Advanced Science · 2023-09 · 10 (27)

DOI: 10.1002/advs.202302263 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Advanced Science, online erschienen am 06.08.2023. Verfasst von Gabin Yoon und 2 weiteren Autor:innen. Beteiligte Einrichtung: Battery Material TU, Samsung Advanced Institute of Technology, 130, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 443-803, Republic of Korea. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 123 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid‐state Li–metal batteries (based on solid‐state electrolytes) offer excellent safety and exhibit high potential to overcome the energy‐density limitations of current Li–ion batteries, making them suitable candidates for the rapidly developing fields of electric vehicles and energy‐storage systems. However, establishing close solid–solid contact is challenging, and Li‐dendrite formation in solid‐state electrolytes at high current densities causes fatal technical problems (due to high interfacial resistance and short‐circuit failure). The Li metal/solid electrolyte interfacial properties significantly influence the kinetics of Li–metal batteries and short‐circuit formation. This review discusses various strategies for introducing anode interlayers, from the perspective of reducing the interfacial resistance and preventing short‐circuit formation. In addition, 3D anode structural‐design strategies are discussed to alleviate the stress caused by volume changes during charging and discharging. This review highlights the importance of comprehensive anode/electrolyte interface control and anode design strategies that reduce the interfacial resistance, hinder short‐circuit formation, and facilitate stress relief for developing Li–metal batteries with commercial‐level performance.

Schlagwörter

Stichwörter der Autor:innen

Garnet solid electrolytesLi metal/solid electrolyte interfaceLi-metal batteriesanode interlayers

Autor:innen und Institutionen

  • Battery Material TU, Samsung Advanced Institute of Technology, 130, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 443-803, Republic of Korea.

ORCID-Profile: Ju-Sik Kim

Zitieren

APA

Yoon, G., Kim, S., & Kim, J. S. (2023). Design Strategies for Anodes and Interfaces Toward Practical Solid‐State Li‐Metal Batteries. Advanced Science, 10(27). https://doi.org/10.1002/advs.202302263

Vancouver

Yoon G, Kim S, Kim JS. Design Strategies for Anodes and Interfaces Toward Practical Solid‐State Li‐Metal Batteries. Advanced Science. 2023;10(27). doi:10.1002/advs.202302263

BibTeX
@article{Yoon2023,
  author = {Yoon, Gabin and Kim, Sewon and Kim, Ju-Sik},
  title = {Design Strategies for Anodes and Interfaces Toward Practical Solid‐State Li‐Metal Batteries},
  journal = {Advanced Science},
  year = {2023},
  volume = {10},
  number = {27},
  doi = {10.1002/advs.202302263}
}
Kostenlos starten →