Kinetic‐Controlled Crystallization of α ‐FAPbI 3 Inducing Preferred Crystallographic Orientation Enhances Photovoltaic Performance
Advanced Science · 2023-05 · 10 (14)
DOI: 10.1002/advs.202300798 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 30.03.2023. Verfasst von Sooeun Shin und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Energy Science, Sungkyunkwan University, Suwon, 440-746, Republic of Korea. Die Arbeit wurde bisher 51-mal zitiert (Crossref) und nennt 105 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea Institute of Energy Technology Evaluation and Planning.
Abstract (Originalsprache)
Crystallization kinetic controls the crystallographic orientation, inducing anisotropic properties of the materials. As a result, preferential orientation with advanced optoelectronic properties can enhance the photovoltaic devices' performance. Although incorporation of additives is one of the most studied methods to stabilize the photoactive α ‐phase of formamidinium lead tri‐iodide ( α ‐FAPbI 3 ), no studies focus on how the additives affect the crystallization kinetics. Along with the role of methylammonium chloride (MACl) as a “stabilizer” in the formation of α ‐FAPbI 3 , herein, the additional role as a “controller” in the crystallization kinetics is pointed out. With microscopic observations, for example, electron backscatter diffraction and selected area electron diffraction, it is examined that higher concentration of MACl induces slower crystallization kinetics, resulting in larger grain size and [100] preferred orientation. Optoelectronic properties of [100] preferentially oriented grains with less non‐radiative recombination, a longer lifetime of charge carriers, and lower photocurrent deviations in between each grain induce higher short‐circuit current density ( J sc ) and fill factor. Resulting MACl40 mol% attains the highest power conversion efficiency (PCE) of 24.1%. The results provide observations of a direct correlation between the crystallographic orientation and device performance as it highlights the importance of crystallization kinetics resulting in desirable microstructures for device engineering.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Energy Science, Sungkyunkwan University, Suwon, 440-746, Republic of Korea.
- SKKU Institute of Energy Science and Technology (SIEST), Sungkyunkwan University, Suwon, 440-746, Republic of Korea.
- Department of Physics, University of Oxford, Clarendon Laboratory, Oxford, OX1 3PU, UK.
- Pohang Accelerator Laboratory, Pohang, Kyungbuk, 37673, Republic of Korea.
- School of Chemical Engineering, Sungkyunkwan University, Suwon, 440-746, Republic of Korea.
ORCID-Profile: Nam-Gyu Park, Hyunjung Shin
Förderung
- National Research Foundation of Korea
- Korea Institute of Energy Technology Evaluation and Planning
Zitieren
APA
Shin, S., Seo, S., Jeong, S., Sharbirin, A. S., Kim, J., Ahn, H., Park, N. G., & Shin, H. (2023). Kinetic‐Controlled Crystallization of α ‐FAPbI 3 Inducing Preferred Crystallographic Orientation Enhances Photovoltaic Performance. Advanced Science, 10(14). https://doi.org/10.1002/advs.202300798
Vancouver
Shin S, Seo S, Jeong S, Sharbirin AS, Kim J, Ahn H, et al. Kinetic‐Controlled Crystallization of α ‐FAPbI 3 Inducing Preferred Crystallographic Orientation Enhances Photovoltaic Performance. Advanced Science. 2023;10(14). doi:10.1002/advs.202300798
BibTeX
@article{Shin2023,
author = {Shin, Sooeun and Seo, Seongrok and Jeong, Seonghwa and Sharbirin, Anir S and Kim, Jeongyong and Ahn, Hyungju and Park, Nam-Gyu and Shin, Hyunjung},
title = {Kinetic‐Controlled Crystallization of α ‐FAPbI 3 Inducing Preferred Crystallographic Orientation Enhances Photovoltaic Performance},
journal = {Advanced Science},
year = {2023},
volume = {10},
number = {14},
doi = {10.1002/advs.202300798}
}
EUVIMED