Nanostructured 3D‐Printed Hybrid Scaffold Accelerates Bone Regeneration by Photointegrating Nanohydroxyapatite
Advanced Science · 2023-05 · 10 (13)
DOI: 10.1002/advs.202300038 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 11.03.2023. Verfasst von Lei Tong und 11 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Research Center for Biomaterials, Sichuan University, 29# Wangjiang Road, Chengdu, 610064, China. Hauptthemen laut MEDLINE: Tissue Scaffolds, Bone Regeneration. Die Arbeit wurde bisher 53-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Sichuan Provincial Key R&D Program of China.
Abstract (Originalsprache)
Nanostructured biomaterials that replicate natural bone architecture are expected to facilitate bone regeneration. Here, nanohydroxyapatite (nHAp) with vinyl surface modification is acquired by silicon‐based coupling agent and photointegrated with methacrylic anhydride‐modified gelatin to manufacture a chemically integrated 3D‐printed hybrid bone scaffold (75.6 wt% solid content). This nanostructured procedure significantly increases its storage modulus by 19.43‐fold (79.2 kPa) to construct a more stable mechanical structure. Furthermore, biofunctional hydrogel with biomimetic extracellular matrix is anchored onto the filament of 3D‐printed hybrid scaffold (HGel‐ g ‐nHAp) by polyphenol‐mediated multiple chemical reactions, which contributes to initiate early osteogenesis and angiogenesis by recruiting endogenous stem cells in situ. Significant ectopic mineral deposition is also observed in subcutaneously implanted nude mice with storage modulus enhancement of 25.3‐fold after 30 days. Meanwhile, HGel‐ g ‐nHAp realizes substantial bone reconstruction in the rabbit cranial defect model, achieving 61.3% breaking load strength and 73.1% bone volume fractions in comparison to natural cranium 15 weeks after implantation. This optical integration strategy of vinyl modified nHAp provides a prospective structural design for regenerative 3D‐printed bone scaffold.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- National Engineering Research Center for Biomaterials, Sichuan University, 29# Wangjiang Road, Chengdu, 610064, China.
- Sichuan Testing Center of Medical Devices, Sichuan Institute for Drug Control, NMPA Key Laboratory for Technical Research on Drug Products In Vitro and In Vivo Correlation, 8# Xinwen Road, Chengdu, 611731, China.
- Department of Neurosurgery, West China Hospital, Sichuan University, 37# Guoxue Lane, Chengdu, 610041, China.
- Sichuan Testing Center for Biomaterials and Medical Devices, Sichuan University, 29# Wangjiang Road, Chengdu, 610064, China.
ORCID-Profile: Yong Sun
Förderung
- National Natural Science Foundation of China
- Sichuan Provincial Key R&D Program of China
Zitieren
APA
Tong, L., Pu, X., Liu, Q., Li, X., Chen, M., Wang, P., Zou, Y., Lu, G., Liang, J., Fan, Y., Zhang, X., & Sun, Y. (2023). Nanostructured 3D‐Printed Hybrid Scaffold Accelerates Bone Regeneration by Photointegrating Nanohydroxyapatite. Advanced Science, 10(13). https://doi.org/10.1002/advs.202300038
Vancouver
Tong L, Pu X, Liu Q, Li X, Chen M, Wang P, et al. Nanostructured 3D‐Printed Hybrid Scaffold Accelerates Bone Regeneration by Photointegrating Nanohydroxyapatite. Advanced Science. 2023;10(13). doi:10.1002/advs.202300038
BibTeX
@article{Tong2023,
author = {Tong, Lei and Pu, Xiaocong and Liu, Quanying and Li, Xing and Chen, Manyu and Wang, Peilei and Zou, Yaping and Lu, Gonggong and Liang, Jie and Fan, Yujiang and Zhang, Xingdong and Sun, Yong},
title = {Nanostructured 3D‐Printed Hybrid Scaffold Accelerates Bone Regeneration by Photointegrating Nanohydroxyapatite},
journal = {Advanced Science},
year = {2023},
volume = {10},
number = {13},
doi = {10.1002/advs.202300038}
}
EUVIMED