EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electric‐Field‐Driven Printed 3D Highly Ordered Microstructure with Cell Feature Size Promotes the Maturation of Engineered Cardiac Tissues

Guangming Zhang, Wenhai Li, Miao Yu, Hui Huang, Yaning Wang, Zhifeng Han, Kai Shi, Lingxuan Ma, Zhihao Yu, Xiaoyang Zhu, Zilong Peng, Yue Xu und 9 weitere

Advanced Science · 2023-04 · 10 (11)

DOI: 10.1002/advs.202206264 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 13.02.2023. Verfasst von Guangming Zhang und 20 weiteren Autor:innen. Beteiligte Einrichtung: Shandong Engineering Research Center for Additive Manufacturing, Qingdao University of Technology, Qingdao, 266520, P. R. China. Hauptthemen laut MEDLINE: Tissue Engineering, Induced Pluripotent Stem Cells. Die Arbeit wurde bisher 123-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Outstanding Youth Innovation Team in Universities of Shandong Province, China, Jiangsu Province Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Engineered cardiac tissues (ECTs) derived from human induced pluripotent stem cells (hiPSCs) are viable alternatives for cardiac repair, patient‐specific disease modeling, and drug discovery. However, the immature state of ECTs limits their clinical utility. The microenvironment fabricated using 3D scaffolds can affect cell fate, and is crucial for the maturation of ECTs. Herein, the authors demonstrate an electric‐field‐driven (EFD) printed 3D highly ordered microstructure with cell feature size to promote the maturation of ECTs. The simulation and experimental results demonstrate that the EFD jet microscale 3D printing overcomes the jet repulsion without any prior requirements for both conductive and insulating substrates. Furthermore, the 3D highly ordered microstructures with a fiber diameter of 10–20 µm and spacing of 60–80 µm have been fabricated by maintaining a vertical jet, achieving the largest ratio of fiber diameter/spacing of 0.29. The hiPSCs‐derived cardiomyocytes formed ordered ECTs with their sarcomere growth along the fiber and developed synchronous functional ECTs inside the 3D‐printed scaffold with matured calcium handling compared to the 2D coverslip. Therefore, the EFD jet 3D microscale printing process facilitates the fabrication of scaffolds providing a suitable microenvironment to promote the maturation of ECTs, thereby showing great potential for cardiac tissue engineering.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue EngineeringInduced Pluripotent Stem CellsHumansMyocytes, CardiacCell DifferentiationPrinting, Three-Dimensional

Stichwörter der Autor:innen

3D highly ordered microstructurecell feature sizeelectric-field-drivenengineered cardiac tissuessmall fiber spacing

Autor:innen und Institutionen

  • Shandong Engineering Research Center for Additive Manufacturing, Qingdao University of Technology, Qingdao, 266520, P. R. China.
  • Institute for Cardiovascular Science & Department of Cardiovascular Surgery of the First Affiliated Hospital, Medical College, Soochow University, Suzhou, 215000, P. R. China.
  • State Key Laboratory for Manufacturing System Engineering, Xi'an Jiaotong University, Xi'an, 710049, P. R. China.
  • Department of Spinal Surgery, The Affilliated Hosepital of Qingdao University, Qingdao, 266003, P. R. China.
  • Yantai Affiliated Hospital, Binzhou Medical University, Yantai, 264100, P. R. China.
  • Institute of Rehabilitation Engineering, Binzhou Medical University, Yantai, 264100, P. R. China.

ORCID-Profile: Hongbo Lan

Förderung

  • National Natural Science Foundation of China
  • Outstanding Youth Innovation Team in Universities of Shandong Province, China
  • Jiangsu Province Natural Science Foundation
  • Suzhou Science and Technology Plan
  • China Postdoctoral Science Foundation
  • Natural Science Foundation of Jiangsu Province

Zitieren

APA

Zhang, G., Li, W., Yu, M., Huang, H., Wang, Y., Han, Z., Shi, K., Ma, L., Yu, Z., Zhu, X., Peng, Z., Xu, Y., Li, X., Hu, S., He, J., Li, D., Xi, Y., Lan, H., Xu, L., …, & Xiao, M. (2023). Electric‐Field‐Driven Printed 3D Highly Ordered Microstructure with Cell Feature Size Promotes the Maturation of Engineered Cardiac Tissues. Advanced Science, 10(11). https://doi.org/10.1002/advs.202206264

Vancouver

Zhang G, Li W, Yu M, Huang H, Wang Y, Han Z, et al. Electric‐Field‐Driven Printed 3D Highly Ordered Microstructure with Cell Feature Size Promotes the Maturation of Engineered Cardiac Tissues. Advanced Science. 2023;10(11). doi:10.1002/advs.202206264

BibTeX
@article{Zhang2023,
  author = {Zhang, Guangming and Li, Wenhai and Yu, Miao and Huang, Hui and Wang, Yaning and Han, Zhifeng and Shi, Kai and Ma, Lingxuan and Yu, Zhihao and Zhu, Xiaoyang and Peng, Zilong and Xu, Yue and Li, Xiaoyun and Hu, Shijun and He, Jiankang and Li, Dichen and Xi, Yongming and Lan, Hongbo and Xu, Lin and Tang, Mingliang and Xiao, Miao},
  title = {Electric‐Field‐Driven Printed 3D Highly Ordered Microstructure with Cell Feature Size Promotes the Maturation of Engineered Cardiac Tissues},
  journal = {Advanced Science},
  year = {2023},
  volume = {10},
  number = {11},
  doi = {10.1002/advs.202206264}
}
Kostenlos starten →