EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Printed Conductive Multiscale Nerve Guidance Conduit with Hierarchical Fibers for Peripheral Nerve Regeneration

Yongcong Fang iD, Chengjin Wang iD, Zibo Liu, Jeonghoon Ko, Li Chen, Ting Zhang iD, Zhuo Xiong iD, Lei Zhang, Wei Sun iD

Advanced Science · 2023-04 · 10 (12)

DOI: 10.1002/advs.202205744 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 17.02.2023. Verfasst von Yongcong Fang und 8 weiteren Autor:innen. Beteiligte Einrichtung: Biomanufacturing Center, Department of Mechanical Engineering, Tsinghua University, Beijing, 100084, P. R. China. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Nerve Regeneration, Sciatic Nerve. Die Arbeit wurde bisher 161-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Tsinghua University Initiative Scientific Research Program, New Faculty Start-up Funding of Tsinghua University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nerve guidance conduits (NGCs) have become a promising alternative for peripheral nerve regeneration; however, the outcome of nerve regeneration and functional recovery is greatly affected by the physical, chemical, and electrical properties of NGCs. In this study, a conductive multiscale filled NGC (MF‐NGC) consisting of electrospun poly(lactide‐co‐caprolactone) (PCL)/collagen nanofibers as the sheath, reduced graphene oxide /PCL microfibers as the backbone, and PCL microfibers as the internal structure for peripheral nerve regeneration is developed. The printed MF‐NGCs presented good permeability, mechanical stability, and electrical conductivity, which further promoted the elongation and growth of Schwann cells and neurite outgrowth of PC12 neuronal cells. Animal studies using a rat sciatic nerve injury model reveal that the MF‐NGCs promote neovascularization and M2 transition through the rapid recruitment of vascular cells and macrophages. Histological and functional assessments of the regenerated nerves confirm that the conductive MF‐NGCs significantly enhance peripheral nerve regeneration, as indicated by improved axon myelination, muscle weight increase, and sciatic nerve function index. This study demonstrates the feasibility of using 3D‐printed conductive MF‐NGCs with hierarchically oriented fibers as functional conduits that can significantly enhance peripheral nerve regeneration.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalNerve RegenerationSciatic NerveElectrochemical TechniquesNeuritesAnimalsRatsCell Line

Stichwörter der Autor:innen

3D bioprintingaligned microfibergraphene oxidenerve guidance conduitsnerve regeneration

Autor:innen und Institutionen

  • Biomanufacturing Center, Department of Mechanical Engineering, Tsinghua University, Beijing, 100084, P. R. China.
  • Biomanufacturing and Rapid Forming Technology Key Laboratory of Beijing, Beijing, 100084, P. R. China.
  • "Biomanufacturing and Engineering Living Systems" Innovation International Talents Base (111 Base), Beijing, 100084, P. R. China.
  • Department of Mechanical Engineering, Drexel University, Philadelphia, PA, 19104, USA.

ORCID-Profile: Yongcong Fang, Chengjin Wang, Ting Zhang, Zhuo Xiong, Wei Sun

Förderung

  • National Natural Science Foundation of China
  • Tsinghua University Initiative Scientific Research Program
  • New Faculty Start-up Funding of Tsinghua University
  • National Key Research and Development Program of China
  • China Postdoctoral Science Foundation

Zitieren

APA

Fang, Y., Wang, C., Liu, Z., Ko, J., Chen, L., Zhang, T., Xiong, Z., Zhang, L., & Sun, W. (2023). 3D Printed Conductive Multiscale Nerve Guidance Conduit with Hierarchical Fibers for Peripheral Nerve Regeneration. Advanced Science, 10(12). https://doi.org/10.1002/advs.202205744

Vancouver

Fang Y, Wang C, Liu Z, Ko J, Chen L, Zhang T, et al. 3D Printed Conductive Multiscale Nerve Guidance Conduit with Hierarchical Fibers for Peripheral Nerve Regeneration. Advanced Science. 2023;10(12). doi:10.1002/advs.202205744

BibTeX
@article{Fang2023,
  author = {Fang, Yongcong and Wang, Chengjin and Liu, Zibo and Ko, Jeonghoon and Chen, Li and Zhang, Ting and Xiong, Zhuo and Zhang, Lei and Sun, Wei},
  title = {3D Printed Conductive Multiscale Nerve Guidance Conduit with Hierarchical Fibers for Peripheral Nerve Regeneration},
  journal = {Advanced Science},
  year = {2023},
  volume = {10},
  number = {12},
  doi = {10.1002/advs.202205744}
}
Kostenlos starten →