EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Room Temperature Viscous Flow of Amorphous Silica Induced by Electron Beam Irradiation

Sebastian Bruns iD, Christian Minnert iD, Laszlo Pethö, Johann Michler iD, Karsten Durst iD

Advanced Science · 2023-03 · 10 (7)

DOI: 10.1002/advs.202205237 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, online erschienen am 13.01.2023. Verfasst von Sebastian Bruns und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science, Technical University of Darmstadt, Alarich-Weiss-Straße 2, DE-64287, Darmstadt, Germany. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft (DFG - German Research Foundation), Open Access Publishing Fund of the Technical University of Darmstadt.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing use of oxide glasses in high‐tech applications illustrates the demand of novel engineering techniques on nano‐ and microscale. Due to the high viscosity of oxide glasses at room temperature, shaping operations are usually performed at temperatures close or beyond the point of glass transition T g . Those treatments, however, are global and affect the whole component. It is known from the literature that electron irradiation facilitates the viscous flow of amorphous silica near room temperature for nanoscale components. At the micrometer scale, however, a comprehensive study on this topic is still pending. In the present study, electron irradiation inducing viscous flow at room temperature is observed using a micropillar compression approach and amorphous silica as a model system. A comparison to high temperature yielding up to a temperature of 1100 °C demonstrates that even moderate electron irradiation resembles the mechanical response of 600 °C and beyond. As an extreme case, a yield strength as low as 300 MPa is observed with a viscosity indicating that T g has been passed. Those results show that electron irradiation‐facilitated viscous flow is not limited to the nanoscale which offers great potential for local microengineering.

Schlagwörter

Stichwörter der Autor:innen

amorphous silicaelectron beam irradiationhigh temperature testingmicropillar compressionnanoindentationviscosity

Autor:innen und Institutionen

  • Department of Materials Science, Technical University of Darmstadt, Alarich-Weiss-Straße 2, DE-64287, Darmstadt, Germany.
  • Empa, Swiss Federal Laboratories for Materials Science and Technology, Feuerwerkerstrasse 39, Thun, CH-3602, Switzerland.

ORCID-Profile: Sebastian Bruns, Christian Minnert, Johann Michler, Karsten Durst

Förderung

  • Deutsche Forschungsgemeinschaft (DFG - German Research Foundation)
  • Open Access Publishing Fund of the Technical University of Darmstadt

Zitieren

APA

Bruns, S., Minnert, C., Pethö, L., Michler, J., & Durst, K. (2023). Room Temperature Viscous Flow of Amorphous Silica Induced by Electron Beam Irradiation. Advanced Science, 10(7). https://doi.org/10.1002/advs.202205237

Vancouver

Bruns S, Minnert C, Pethö L, Michler J, Durst K. Room Temperature Viscous Flow of Amorphous Silica Induced by Electron Beam Irradiation. Advanced Science. 2023;10(7). doi:10.1002/advs.202205237

BibTeX
@article{Bruns2023,
  author = {Bruns, Sebastian and Minnert, Christian and Pethö, Laszlo and Michler, Johann and Durst, Karsten},
  title = {Room Temperature Viscous Flow of Amorphous Silica Induced by Electron Beam Irradiation},
  journal = {Advanced Science},
  year = {2023},
  volume = {10},
  number = {7},
  doi = {10.1002/advs.202205237}
}
Kostenlos starten →