High‐Throughput Metal 3D Printing Pen Enabled by a Continuous Molten Droplet Transfer
Advanced Science · 2023-02 · 10 (6)
DOI: 10.1002/advs.202205085 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 16.12.2022. Verfasst von Chan Kyu Kim und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Changwon National University, 20, Changwondaehak-ro, Uichang-gu, Changwon-si, Gyeongsangnam-do, 51140, Republic…. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT), Korea Institute of Machinery and Materials, Fundamental Research Program of the Korea Institute of Materials Science.
Abstract (Originalsprache)
In metal additive manufacturing (AM), arc plasma is attracting attention as an alternative heat source to expensive lasers to enable the use of various metal wire materials with a high deposition efficiency. However, the stepwise material deposition and resulting limited number of degrees of freedom limit their potential for high‐throughput and large‐scale production for industrial applications. Herein, a high‐throughput metal 3D printing pen (M3DPen) strategy is proposed based on an arc plasma heat source by harnessing the surface tension of the molten metal for enabling continuous material deposition without a downward flow by gravity. The proposed approach differs from conventional arc‐based metal AM in that it controls the solidification and cooling time between interlayers of a point‐by‐point deposition path, thereby allowing for continuous metal 3D printing of freestanding and overhanging structures at once. The resulting mechanical properties and unique microstructures by continuous metal deposition that occur due to the difference in the thermal conditions of the molten metal under cooling are also investigated. This technology can be applied to a wide range of alloy systems and industrial manufacturing, thereby providing new possibilities for metal 3D printing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Changwon National University, 20, Changwondaehak-ro, Uichang-gu, Changwon-si, Gyeongsangnam-do, 51140, Republic of Korea.
- Department of Joining Technology, Materials Testing & Reliability Division, Korea Institute of Materials Science, 797, Changwon-daero, Seongsan-gu, Changwon-si, Gyeongsangnam-do, 51508, Republic of Korea.
- Busan Machinery Research Center, Korea Institute of Machinery and Materials, 48, Mieumsandan 5-40, 41beon-gil, Gangseo-gu, Busan, 46744, Republic of Korea.
ORCID-Profile: Young Tae Cho
Förderung
- National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT)
- Korea Institute of Machinery and Materials
- Fundamental Research Program of the Korea Institute of Materials Science
- National Research Foundation of Korea Korean government
Zitieren
APA
Kim, C. K., Cho, D. W., Kim, S., Song, S. W., Seo, K. M., & Cho, Y. T. (2023). High‐Throughput Metal 3D Printing Pen Enabled by a Continuous Molten Droplet Transfer. Advanced Science, 10(6). https://doi.org/10.1002/advs.202205085
Vancouver
Kim CK, Cho DW, Kim S, Song SW, Seo KM, Cho YT. High‐Throughput Metal 3D Printing Pen Enabled by a Continuous Molten Droplet Transfer. Advanced Science. 2023;10(6). doi:10.1002/advs.202205085
BibTeX
@article{Kim2023,
author = {Kim, Chan Kyu and Cho, Dae-Won and Kim, Seok and Song, Sang Woo and Seo, Kang Myung and Cho, Young Tae},
title = {High‐Throughput Metal 3D Printing Pen Enabled by a Continuous Molten Droplet Transfer},
journal = {Advanced Science},
year = {2023},
volume = {10},
number = {6},
doi = {10.1002/advs.202205085}
}
EUVIMED