EUVIMEDEUVIMED entdecken
Crossref

Interface‐Engineered P2‐Type Cathode and Biomass‐Derived Anode for Stable Sodium‐Ion Full Cells

Ebru Dogan, Iqra Moeez, Kyung Yoon Chung, Rawdah Whba, Emine Altin, Messaoud Harfouche, Mesut Karta, Tolga Depci, Radostina Stoyanova, Violeta Koleva, Sevda Sahinbay, Serdar Altin

Advanced Sustainable Systems · 2026-04 · 10 (4)

DOI: 10.1002/adsu.202501668 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Sustainable Systems, online erschienen am 08.12.2025. Verfasst von Ebru Dogan und 11 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 76 Literaturangaben. Gefördert von: Istanbul Teknik Üniversitesi.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a sustainable and high‐performance sodium‐ion full‐cell architecture by combining a core@shell Na 0 . 67 Mn 0 . 5 Fe 0 . 5 O 2 @Al 2 O 3 cathode with a hard carbon anode derived from cherry seed biowaste. The P2‐type cathode material is synthesized via a conventional solid‐state method and coated with Al 2 O 3 using a scalable wet‐chemical route. Structural and surface analyses confirmed the formation of a uniform Al 2 O 3 shell, which enhanced the cathode's electrochemical stability by mitigating Mn 3 ⁺‐induced distortion and suppressing electrolyte side reactions. In parallel, the hard carbon anode is produced from cherry seeds—a low‐cost and abundant byproduct—through high‐temperature pyrolysis, delivering high capacity and excellent cycling performance. Electrochemical evaluation of both electrodes in half‐cell and full‐cell configurations revealed favorable sodium‐ion diffusion, robust structural integrity, and improved interfacial properties. The half‐cell, assembled with Na 0 . 67 Mn 0 . 5 Fe 0 . 5 O 2 @Al 2 O 3 cathode, demonstrated remarkable cycling stability and rate capability within a practical 1.5–3.5 V window, retaining 94.5% capacity after 100 cycles. In situ XRD studies further elucidated the phase transitions and stability of the cathode during cycling. This study demonstrates a sustainable and scalable pathway for sodium‐ion battery development by integrating surface‐engineered cathodes and biomass‐derived anodes.

Förderung

  • Istanbul Teknik Üniversitesi

Zitieren

APA

Dogan, E., Moeez, I., Chung, K. Y., Whba, R., Altin, E., Harfouche, M., Karta, M., Depci, T., Stoyanova, R., Koleva, V., Sahinbay, S., & Altin, S. (2026). Interface‐Engineered P2‐Type Cathode and Biomass‐Derived Anode for Stable Sodium‐Ion Full Cells. Advanced Sustainable Systems, 10(4). https://doi.org/10.1002/adsu.202501668

Vancouver

Dogan E, Moeez I, Chung KY, Whba R, Altin E, Harfouche M, et al. Interface‐Engineered P2‐Type Cathode and Biomass‐Derived Anode for Stable Sodium‐Ion Full Cells. Advanced Sustainable Systems. 2026;10(4). doi:10.1002/adsu.202501668

BibTeX
@article{Dogan2026,
  author = {Dogan, Ebru and Moeez, Iqra and Chung, Kyung Yoon and Whba, Rawdah and Altin, Emine and Harfouche, Messaoud and Karta, Mesut and Depci, Tolga and Stoyanova, Radostina and Koleva, Violeta and Sahinbay, Sevda and Altin, Serdar},
  title = {Interface‐Engineered P2‐Type Cathode and Biomass‐Derived Anode for Stable Sodium‐Ion Full Cells},
  journal = {Advanced Sustainable Systems},
  year = {2026},
  volume = {10},
  number = {4},
  doi = {10.1002/adsu.202501668}
}
Kostenlos starten →