EUVIMEDEUVIMED entdecken
Crossref

Enhancing the Structural Stability and Cycling Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material by Al 3+ Ion Doping

Long Jiang, Qinghua Tian, Xueyi Guo, Leiying Zeng, Jian Li, Zhiyuan Liu, Wanjing Yu, Gaoqiang Mao, Hui Tong

Advanced Sustainable Systems · 2026-01 · 10 (1)

DOI: 10.1002/adsu.202501663 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Sustainable Systems, online erschienen am 14.01.2026. Verfasst von Long Jiang und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High‐nickel ternary materials are considered as promising cathode materials for lithium‐ion batteries, primarily due to their high specific capacity and energy density. However, the crystal structure of high‐nickel cathode materials undergoes significant changes during charge and discharge cycles. The accumulated stress leads to the formation and growth of microcracks along the inter‐particle boundaries, ultimately compromising particle integrity. Repeated volume contractions and expansions eventually cause further pulverization of the material. In this study, Al 3+ ion doping was employed to stabilize the layered structure of the high‐nickel ternary materials. Al 3+ ‐doped LiNi 0.8 Co 0.1 Mn 0.1 O 2 was synthesized by a one‐step solid‐state sintering method. The characterization confirmed that Al 3+ ions were successfully doped into the transition metal layers of the cathode material and formed stronger Al─O covalent bonds, which enhanced the stability of the bulk phase structure, suppressed phase transition, and microcracks. The cathode material doped with 1.5 mol.% Al 3+ exhibited excellent cycling stability, with a capacity retention rate increased by 15.01% after 600 cycles compared to the pristine specimen. In addition, Al 3+ doping reduces cation mixing and optimizes ion transport kinetics, the discharge capacity reached 145.5 mAh·g −1 at 10 C rate. Therefore, achieving Al 3+ ion doping through co‐lithium sintering provides an effective strategy for improving the performance of high‐nickel cathode materials in lithium‐ion batteries.

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Jiang, L., Tian, Q., Guo, X., Zeng, L., Li, J., Liu, Z., Yu, W., Mao, G., & Tong, H. (2026). Enhancing the Structural Stability and Cycling Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material by Al 3+ Ion Doping. Advanced Sustainable Systems, 10(1). https://doi.org/10.1002/adsu.202501663

Vancouver

Jiang L, Tian Q, Guo X, Zeng L, Li J, Liu Z, et al. Enhancing the Structural Stability and Cycling Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material by Al 3+ Ion Doping. Advanced Sustainable Systems. 2026;10(1). doi:10.1002/adsu.202501663

BibTeX
@article{Jiang2026,
  author = {Jiang, Long and Tian, Qinghua and Guo, Xueyi and Zeng, Leiying and Li, Jian and Liu, Zhiyuan and Yu, Wanjing and Mao, Gaoqiang and Tong, Hui},
  title = {Enhancing the Structural Stability and Cycling Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material by Al 3+ Ion Doping},
  journal = {Advanced Sustainable Systems},
  year = {2026},
  volume = {10},
  number = {1},
  doi = {10.1002/adsu.202501663}
}
Kostenlos starten →