EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bifunctional WO 3 Photoelectrodes Decorated by Inkjet Printing for Solar Supercapacitors

Nicola Sangiorgi, Alex Sangiorgi, Alberto Soccio, Marzio Rancan, Lidia Armelao, Alessandra Sanson

Advanced Sustainable Systems · 2025-08 · 9 (8)

DOI: 10.1002/adsu.202500478 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Sustainable Systems, online erschienen am 15.05.2025. Verfasst von Nicola Sangiorgi und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tungsten oxide‐based photoelectrodes for solar supercapacitor applications are initially prepared by screen printing. After a complete functional characterization, the obtained results show the ability of these films to increase the number of stored charges when illuminated due to a diffusion mechanism and finally to produce an areal capacitance of 1.6 and 0.7 mF cm −2 under illumination or in the dark, respectively. Decorating the as‐produced electrodes by inkjet printing allowed us to increase their exposed surface area, thus enhancing the areal capacitance up to 2.2 mF cm −2 while reducing charge‐transfer resistances. Finally, gel‐state symmetrical devices with agar‐agar‐based electrolyte are prepared and tested with different illumination intensities. At high illumination (1000 W m −2 ), an areal capacitance of 2.5 mF cm −2 is recorded, however, at low illumination conditions (500 W m −2 ), the highest value of 7.9 mF cm −2 is obtained (at 0.3 mA cm −2 ) due to reduced recombination phenomena between the photogenerated charges and the applied current density. This work demonstrates the potentiality of WO 3 as a bifunctional material for solar rechargeable supercapacitors, paving the way for the development of new fully integrated devices for the energy sector.

Zitieren

APA

Sangiorgi, N., Sangiorgi, A., Soccio, A., Rancan, M., Armelao, L., & Sanson, A. (2025). Bifunctional WO 3 Photoelectrodes Decorated by Inkjet Printing for Solar Supercapacitors. Advanced Sustainable Systems, 9(8). https://doi.org/10.1002/adsu.202500478

Vancouver

Sangiorgi N, Sangiorgi A, Soccio A, Rancan M, Armelao L, Sanson A. Bifunctional WO 3 Photoelectrodes Decorated by Inkjet Printing for Solar Supercapacitors. Advanced Sustainable Systems. 2025;9(8). doi:10.1002/adsu.202500478

BibTeX
@article{Sangiorgi2025,
  author = {Sangiorgi, Nicola and Sangiorgi, Alex and Soccio, Alberto and Rancan, Marzio and Armelao, Lidia and Sanson, Alessandra},
  title = {Bifunctional WO 3 Photoelectrodes Decorated by Inkjet Printing for Solar Supercapacitors},
  journal = {Advanced Sustainable Systems},
  year = {2025},
  volume = {9},
  number = {8},
  doi = {10.1002/adsu.202500478}
}
Kostenlos starten →