Green, Biodegradable, and Flexible Resistive Heaters‐Based Upon a Novel Laser‐Induced Graphene Manufacturing Process
Advanced Sustainable Systems · 2024-10 · 8 (10)
DOI: 10.1002/adsu.202400166 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Sustainable Systems, online erschienen am 27.05.2024. Verfasst von Rogério Miranda Morais und 6 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Fundação de Amparo à Pesquisa do Estado de São Paulo, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior.
Abstract (Originalsprache)
Laser induced graphene (LIG), prepared directly with an in situ synthesis method onto Kraft Paper substrates, is proposed for the manufacture of biodegradable electronic devices. The investigation explores the influence of laser power and scanning speed on the properties of LIG conductive tracks and a sheet resistance of up to 0.25 kΩ sq−1. Raman spectroscopy and microscopy is used to analyse the interfacial properties, in particular the transition of cellulose fibers to carbonized graphene flakes through photothermal pyrolysis, leading to the formation of coral‐like structures. To demonstrate the applicability of the approach, flexible resistive heaters have been manufactured and tests show rapid heating with a homogeneous distribution and a maximum temperature of 145.5 °C. Additionally, an electro‐thermal conversion efficiency (hr+c) of 17.05 mW (°C cm 2 )−1 is achieved. Finally, a comparative Life Cycle Assessment with FR‐4 based electronics has been undertaken and the environmental impacts are calculated. The impact assessment shows a two magnitude lower impact on the environment for most categories, which suggests the approach is beneficial for the environment at a global production level. The results show that the photothermal pyrolysis of Kraft paper using a laser diode allows for low‐impact devices flexible and green electronics products.
Förderung
- Engineering and Physical Sciences Research Council
- Fundação de Amparo à Pesquisa do Estado de São Paulo
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Zitieren
APA
Morais, R. M., Vieira, D. H., Ozório, M. D. S., Nogueira, G. L., Rollo, A., Kettle, J., & Alves, N. (2024). Green, Biodegradable, and Flexible Resistive Heaters‐Based Upon a Novel Laser‐Induced Graphene Manufacturing Process. Advanced Sustainable Systems, 8(10). https://doi.org/10.1002/adsu.202400166
Vancouver
Morais RM, Vieira DH, Ozório MDS, Nogueira GL, Rollo A, Kettle J, et al. Green, Biodegradable, and Flexible Resistive Heaters‐Based Upon a Novel Laser‐Induced Graphene Manufacturing Process. Advanced Sustainable Systems. 2024;8(10). doi:10.1002/adsu.202400166
BibTeX
@article{Morais2024,
author = {Morais, Rogério Miranda and Vieira, Douglas Henrique and Ozório, Maiza da Silva and Nogueira, Gabriel Leonardo and Rollo, Andrew and Kettle, Jeff and Alves, Neri},
title = {Green, Biodegradable, and Flexible Resistive Heaters‐Based Upon a Novel Laser‐Induced Graphene Manufacturing Process},
journal = {Advanced Sustainable Systems},
year = {2024},
volume = {8},
number = {10},
doi = {10.1002/adsu.202400166}
}
EUVIMED