3D‐Nanoprinted Fluidically Steerable Soft Robotic Microcatheters
Advanced Robotics Research · 2026-08 · 2 (4)
DOI: 10.1002/adrr.202500197 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Robotics Research, online erschienen am 28.04.2026. Verfasst von Bailey M. Felix und 17 weiteren Autor:innen. Die Arbeit nennt 107 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institutos Nacionales de la Salud, U.S. National Science Foundation.
Abstract (Originalsprache)
Endovascular interventions—i.e., minimally invasive procedures that involve navigating guidewires and/or microcatheters through a patient's vasculature to access target treatment sites—have emerged as a preferable alternative to traditional open surgery in many clinical contexts. Unfortunately, maneuverability constraints inherent to conventional guidewire‐microcatheter systems can hinder effective navigation to target sites, elevating the risk of procedural complications or failed catheterization. Soft robotic surgical instruments that harness fluidic actuation schemes hold unique promise to overcome such challenges; however, manufacturing‐induced limitations remain a critical barrier to their miniaturization, reproducibility, and clinical translation. To address these issues, in this work, a novel additive manufacturing strategy is presented to realize fluidically steerable soft robotic microcatheters via “two‐photon direct laser writing (DLW)”. As an exemplar relevant to 3‐French (1 mm‐in‐diameter) microcatheters used for transarterial chemoembolization (TACE), a 3D‐printed soft microrobotic tip is fabricated, which enables localized steering driven by microfluidic inputs while simultaneously facilitating fluidic payload delivery through a central lumen. By providing a pathway to new classes of soft robotic microsurgical instruments that enable on‐demand steerability via fluidic means, the presented strategy offers notable potential for navigating narrow, complex, tortuous, and/or delicate vasculature to enhance the safety and efficacy of endovascular therapy.
Förderung
- Institutos Nacionales de la Salud
- U.S. National Science Foundation
Zitieren
APA
Felix, B. M., Carton, M., Young, O. M., Barnes, N., Andreou, J. T., McHugh, S., McCann, J. E., Davis, C., Reddig‐Leiman, V., Kamran, A., Gandhi, D., Janowski, M., Brown, J. D., Fuge, M., Krieger, A., Weiss, C. R., Bailey, C. R., & Sochol, R. D. (2026). 3D‐Nanoprinted Fluidically Steerable Soft Robotic Microcatheters. Advanced Robotics Research, 2(4). https://doi.org/10.1002/adrr.202500197
Vancouver
Felix BM, Carton M, Young OM, Barnes N, Andreou JT, McHugh S, et al. 3D‐Nanoprinted Fluidically Steerable Soft Robotic Microcatheters. Advanced Robotics Research. 2026;2(4). doi:10.1002/adrr.202500197
BibTeX
@article{Felix2026,
author = {Felix, Bailey M. and Carton, Molly and Young, Olivia M. and Barnes, Noah and Andreou, Jordi T. and McHugh, Sarah and McCann, Jack E. and Davis, Claudia and Reddig‐Leiman, Victoria and Kamran, Afsah and Gandhi, Dheeraj and Janowski, Miroslaw and Brown, Jeremy D. and Fuge, Mark and Krieger, Axel and Weiss, Clifford R. and Bailey, Christopher R. and Sochol, Ryan D.},
title = {3D‐Nanoprinted Fluidically Steerable Soft Robotic Microcatheters},
journal = {Advanced Robotics Research},
year = {2026},
volume = {2},
number = {4},
doi = {10.1002/adrr.202500197}
}
EUVIMED