Incorporating Si into Sb 2 Se 3 : Tailoring Optical Phase Change Materials via Nanocomposites
Advanced Optical Materials · 2026-02 · 14 (8)
DOI: 10.1002/adom.202503389 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Optical Materials, online erschienen am 11.02.2026. Verfasst von Chih‐Yu Lee und 12 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Division of Electrical, Communications and Cyber Systems, Division of Materials Research.
Abstract (Originalsprache)
Optical phase change materials (OPCMs) have attracted attention for their versatility as nonvolatile photonic modulators. Discovering novel materials or engineering existing ones is therefore crucial to achieving the performance that current materials lack. Here, we employ co‐sputtering to investigate the doping of Si into Sb 2 Se 3 . We investigate the optical, structural, and thermal properties and compare results with those obtained from first‐principles calculations. We also study the crystallization and melt‐quenching via nano‐differential scanning calorimetry (NanoDSC). We find that 20% Si increases the transparency window in both states, specifically to 800 nm in the amorphous phase, while reducing power consumption by lowering the melting temperature—at the cost of reducing the refractive index contrast and slowing the kinetics of the phase transition. Moreover, we demonstrate switching between the amorphous and crystalline states of Si‐Sb 2 Se 3 using electro‐thermal switching in photonic integrated devices, ∼100‐µm 2 microheaters, and the NanoDSC sensor. Importantly, we observe that phase segregation in recrystallized films forms a nanocomposite with Sb 2 Se 3 grains in an amorphous matrix, allowing both reversible switching and effective‐medium optical properties. By harnessing phase segregation rather than avoiding it, nanocomposites transform a potential failure mechanism into a design strategy, enabling deliberate tuning of OPCM properties through targeted dopant selection.
Förderung
- Division of Electrical, Communications and Cyber Systems
- Division of Materials Research
Zitieren
APA
Lee, C., Huang, Y., Adams, F., Lian, C., Sun, H., Zhao, J., Ye, Z., Youngblood, N., Hu, J., Allen, L. H., Mo, Y., Takeuchi, I., & Ocampo, C. A. R. (2026). Incorporating Si into Sb 2 Se 3 : Tailoring Optical Phase Change Materials via Nanocomposites. Advanced Optical Materials, 14(8). https://doi.org/10.1002/adom.202503389
Vancouver
Lee C, Huang Y, Adams F, Lian C, Sun H, Zhao J, et al. Incorporating Si into Sb 2 Se 3 : Tailoring Optical Phase Change Materials via Nanocomposites. Advanced Optical Materials. 2026;14(8). doi:10.1002/adom.202503389
BibTeX
@article{Lee2026,
author = {Lee, Chih‐Yu and Huang, Yi‐Siou and Adams, Felix and Lian, Chuanyu and Sun, Hongyi and Zhao, Jie and Ye, Zichao and Youngblood, Nathan and Hu, Juejun and Allen, Leslie H and Mo, Yifei and Takeuchi, Ichiro and Ocampo, Carlos A Ríos},
title = {Incorporating Si into Sb 2 Se 3 : Tailoring Optical Phase Change Materials via Nanocomposites},
journal = {Advanced Optical Materials},
year = {2026},
volume = {14},
number = {8},
doi = {10.1002/adom.202503389}
}
EUVIMED