EUVIMEDEUVIMED entdecken
Crossref

Metastable Zone Engineering With Excess Halide for Low‐Defect MAPbBr 3 Single Crystals with Ultra‐Low X‐Ray Detection Limit

Hyemin Lee, Beomjun Park, Seungmin Lee, Jangwon Byun, Seok Beom Kang, Joo Woong Yoon, Wonho Lee, Jun Hong Noh, Man‐Jong Lee, Dong Hoe Kim

Advanced Optical Materials · 2026-03 · 14 (12)

DOI: 10.1002/adom.202503203 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Optical Materials, online erschienen am 11.03.2026. Verfasst von Hyemin Lee und 9 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: Agency for Defense Development, National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

MAPbBr 3 single crystals (MPB SCs) are promising materials for X‐ray detection; however, their use in low‐dose imaging is limited by high dark current, low detectability, and noise that degrades image clarity. Under X‐ray irradiation, where electron–hole pair generation is inherently low, suppressing defects is critical to minimize losses and maximize charge collection. In this study, metastable zone engineering is employed by tuning the MABr:PbBr 2 ratio during inverse temperature crystallization (ITC) to produce defect‐suppressed MPB SCs. Excess MABr broadens and stabilizes the metastable zone, reducing nucleation events and enabling the growth of large, high‐crystallinity MPB SCs exceeding 10 mm within 11 h. These crystals exhibit electronic properties closer to intrinsic behavior, with prolonged carrier lifetimes of 371 ns and an enhanced mobility‐lifetime ( µτ ) product of 3.43 × 10 −3 cm 2 V −1 . Photoluminescence spectra reveal a distinct secondary peak from photon recycling, with intensity 1.25 times greater than the band‐edge peak, indicating efficient photon reabsorption due to reduced non‐radiative losses. Devices fabricated from excess MPB SCs achieve a record‐low detection limit of 0.47 nGy s −1 , high sensitivity (6.117 × 10 3 µC Gy air −1 cm −2 ), and high‐resolution X‐ray imaging, demonstrating strong potential for advanced medical and industrial applications.

Förderung

  • Agency for Defense Development
  • National Research Foundation of Korea

Zitieren

APA

Lee, H., Park, B., Lee, S., Byun, J., Kang, S. B., Yoon, J. W., Lee, W., Noh, J. H., Lee, M., & Kim, D. H. (2026). Metastable Zone Engineering With Excess Halide for Low‐Defect MAPbBr 3 Single Crystals with Ultra‐Low X‐Ray Detection Limit. Advanced Optical Materials, 14(12). https://doi.org/10.1002/adom.202503203

Vancouver

Lee H, Park B, Lee S, Byun J, Kang SB, Yoon JW, et al. Metastable Zone Engineering With Excess Halide for Low‐Defect MAPbBr 3 Single Crystals with Ultra‐Low X‐Ray Detection Limit. Advanced Optical Materials. 2026;14(12). doi:10.1002/adom.202503203

BibTeX
@article{Lee2026,
  author = {Lee, Hyemin and Park, Beomjun and Lee, Seungmin and Byun, Jangwon and Kang, Seok Beom and Yoon, Joo Woong and Lee, Wonho and Noh, Jun Hong and Lee, Man‐Jong and Kim, Dong Hoe},
  title = {Metastable Zone Engineering With Excess Halide for Low‐Defect MAPbBr 3 Single Crystals with Ultra‐Low X‐Ray Detection Limit},
  journal = {Advanced Optical Materials},
  year = {2026},
  volume = {14},
  number = {12},
  doi = {10.1002/adom.202503203}
}
Kostenlos starten →