Control Over the Microstructure of Vapor‐Deposited CsPbBr 3 Enhances Amplified Spontaneous Emission
Advanced Optical Materials · 2025-10 · 13 (30)
DOI: 10.1002/adom.202502160 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Optical Materials, online erschienen am 28.09.2025. Verfasst von Qimu Yuan und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Leverhulme Trust, Australian Research Council.
Abstract (Originalsprache)
Inorganic cesium‐based metal halide perovskite (MHP) semiconductors have great potential as active layers in optoelectronic devices, such as perovskite light‐emitting diodes (PeLEDs) and perovskite lasers. However, precise control of crystal type, quality, and thickness is required to create high‐performance and reproducible devices. Vapor‐phase vacuum deposition enables fabrication of MHP thin films and devices with excellent uniformity and control over layer thickness, although a full understanding of crystal growth mechanisms and products has proved elusive. Here, conditions of vapor co‐deposition of CsBr and PbBr are related with the optical performance and atomic microstructure of resulting CsPbBr 3 thin films. It is found that the structure is predominantly photoactive γ‐CsPbBr 3 over a wide range of conditions, but the presence of impurity phases and Ruddlesden–Popper (RP) planar defects both degrade optical performance as quantified through measured amplified spontaneous emission (ASE) thresholds. Furthermore, the atomic structure of the dominant impurity phases is resolved: CsPb 2 Br 5 and Cs 4 PbBr 6 . It is revealed that a small nominal excess of CsBr‐precursor flux during co‐evaporation can significantly enhance the nucleation of thin films, resulting in well‐defined grains greater than 500 nm in size and the relative suppression of RP planar defects. Such films exhibit intensified photoluminescence (PL) emission and a reduced ASE threshold of 30.9 µJ cm −2 .
Förderung
- Engineering and Physical Sciences Research Council
- Leverhulme Trust
- Australian Research Council
Zitieren
APA
Yuan, Q., Li, W., Wagner, F. M., Lim, V. J., Herz, L. M., Etheridge, J., & Johnston, M. B. (2025). Control Over the Microstructure of Vapor‐Deposited CsPbBr 3 Enhances Amplified Spontaneous Emission. Advanced Optical Materials, 13(30). https://doi.org/10.1002/adom.202502160
Vancouver
Yuan Q, Li W, Wagner FM, Lim VJ, Herz LM, Etheridge J, et al. Control Over the Microstructure of Vapor‐Deposited CsPbBr 3 Enhances Amplified Spontaneous Emission. Advanced Optical Materials. 2025;13(30). doi:10.1002/adom.202502160
BibTeX
@article{Yuan2025,
author = {Yuan, Qimu and Li, Weilun and Wagner, Ford M. and Lim, Vincent J.‐Y. and Herz, Laura M. and Etheridge, Joanne and Johnston, Michael B.},
title = {Control Over the Microstructure of Vapor‐Deposited CsPbBr 3 Enhances Amplified Spontaneous Emission},
journal = {Advanced Optical Materials},
year = {2025},
volume = {13},
number = {30},
doi = {10.1002/adom.202502160}
}
EUVIMED