EUVIMEDEUVIMED entdecken
Crossref

Organic–Inorganic Hybrid Perovskite Photosensitive Field‐Effect Transistor Enabled by Poly(3‐Hexylthiophene‐2,5‐Diyl) Channel Layer

Fobao Huang, Qingyuan Yang, Yiluo Ding, Chunxiao Liu, Yong Chao, Gongwei Hu, Wei Huang

Advanced Optical Materials · 2025-02 · 13 (4)

DOI: 10.1002/adom.202402376 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Optical Materials, online erschienen am 06.11.2024. Verfasst von Fobao Huang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Key Research and Development Projects of Shaanxi Province, China Postdoctoral Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Photosensitive field‐effect transistors (PhFETs) are three‐terminal photodetectors that enable photocurrent modulation and amplification through gate‐voltage control. Organic‐inorganic hybrid perovskites are known for their high photoelectric conversion efficiency, but ion migration in these materials causes gate‐field shielding, posing challenges for constructing PhFETs using only 3D perovskites. To address this issue, a heterojunction strategy is proposed using the stable and process‐compatible organic semiconductor poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) as the channel layer and the organic‐inorganic hybrid perovskite cesium‐doped formamidinium lead trihalide (FA 0.9 Cs 0.1 PbI 3 ) as the light absorption layer. The bottom‐gate top‐contact PhFETs are fabricated using all‐solution processes. By comparing PhFET performance across three active‐layer structures (perovskite, P3HT, perovskite/P3HT) under dark and illuminated conditions, it is found that perovskite devices basically do not exhibit field‐effect but have the highest light‐to‐dark current ratio; P3HT devices exhibit field‐effect but weak photoresponse at 532 nm; in contrast, P3HT/perovskite heterojunction devices not only achieve field‐effect but also exhibit substantial photoresponse. The P3HT channel effectively modulates or amplifies the photocurrent and dark current of the heterojunction device, yielding nearly ten‐fold enhancements in responsivity and external quantum efficiency compared to perovskite devices, along with significantly improved response speed. This study advances the development of 3D organic‐inorganic hybrid perovskite PhFETs.

Förderung

  • National Natural Science Foundation of China
  • Key Research and Development Projects of Shaanxi Province
  • China Postdoctoral Science Foundation

Zitieren

APA

Huang, F., Yang, Q., Ding, Y., Liu, C., Chao, Y., Hu, G., & Huang, W. (2025). Organic–Inorganic Hybrid Perovskite Photosensitive Field‐Effect Transistor Enabled by Poly(3‐Hexylthiophene‐2,5‐Diyl) Channel Layer. Advanced Optical Materials, 13(4). https://doi.org/10.1002/adom.202402376

Vancouver

Huang F, Yang Q, Ding Y, Liu C, Chao Y, Hu G, et al. Organic–Inorganic Hybrid Perovskite Photosensitive Field‐Effect Transistor Enabled by Poly(3‐Hexylthiophene‐2,5‐Diyl) Channel Layer. Advanced Optical Materials. 2025;13(4). doi:10.1002/adom.202402376

BibTeX
@article{Huang2025,
  author = {Huang, Fobao and Yang, Qingyuan and Ding, Yiluo and Liu, Chunxiao and Chao, Yong and Hu, Gongwei and Huang, Wei},
  title = {Organic–Inorganic Hybrid Perovskite Photosensitive Field‐Effect Transistor Enabled by Poly(3‐Hexylthiophene‐2,5‐Diyl) Channel Layer},
  journal = {Advanced Optical Materials},
  year = {2025},
  volume = {13},
  number = {4},
  doi = {10.1002/adom.202402376}
}
Kostenlos starten →