EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

High‐Permittivity Polysiloxanes for Bright, Stretchable Electroluminescent Devices

Johannes von Szczepanski, Jana Wolf, Wei‐Hsu Hu, René Schneider, Patrick M. Danner, André Kupferschmid, Sandra Jenatsch, Roland Hany, Frank A. Nüesch, Dorina M. Opris

Advanced Optical Materials · 2024-06 · 12 (18)

DOI: 10.1002/adom.202400132 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Optical Materials, online erschienen am 11.04.2024. Verfasst von Johannes von Szczepanski und 9 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: HORIZON EUROPE Marie Sklodowska-Curie Actions, Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung, H2020 European Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Stretchable alternating current electroluminescent (ACEL) devices have a bright future in wearable electronics and soft robotics. Still, their market application is hindered by high operating voltages. The voltage can be reduced by increasing the relative permittivity of the dielectric elastomer in the emissive layer. Here, a fluorine‐free high‐permittivity silicone elastomer functionalized with cyanopropyl side groups, specially designed for application in stretchable ACEL devices, is introduced. The polar silicone elastomer exhibits excellent mechanical properties and a dielectric permittivity four times higher than commercial PDMS. Light‐emitting devices based on the polar elastomer reach 7.5 times higher maximum luminance at the same electric field than PDMS‐based devices and turn on at a 50% lower electric field. Besides, the polar elastomer‐based devices perform better than all materials tested in literature in achieving high luminance at low electric fields. Stretchable ACEL devices are built from the polar elastomer which shows bright and uniform light emission and can be operated up to 50% strain. The high‐permittivity silicones are promising materials for stretchable ACEL devices and can help their breakthrough to market application by overcoming the drawback of high operating voltages.

Förderung

  • HORIZON EUROPE Marie Sklodowska-Curie Actions
  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
  • H2020 European Research Council

Zitieren

APA

Szczepanski, J. V., Wolf, J., Hu, W., Schneider, R., Danner, P. M., Kupferschmid, A., Jenatsch, S., Hany, R., Nüesch, F. A., & Opris, D. M. (2024). High‐Permittivity Polysiloxanes for Bright, Stretchable Electroluminescent Devices. Advanced Optical Materials, 12(18). https://doi.org/10.1002/adom.202400132

Vancouver

Szczepanski JV, Wolf J, Hu W, Schneider R, Danner PM, Kupferschmid A, et al. High‐Permittivity Polysiloxanes for Bright, Stretchable Electroluminescent Devices. Advanced Optical Materials. 2024;12(18). doi:10.1002/adom.202400132

BibTeX
@article{Szczepanski2024,
  author = {Szczepanski, Johannes von and Wolf, Jana and Hu, Wei‐Hsu and Schneider, René and Danner, Patrick M. and Kupferschmid, André and Jenatsch, Sandra and Hany, Roland and Nüesch, Frank A. and Opris, Dorina M.},
  title = {High‐Permittivity Polysiloxanes for Bright, Stretchable Electroluminescent Devices},
  journal = {Advanced Optical Materials},
  year = {2024},
  volume = {12},
  number = {18},
  doi = {10.1002/adom.202400132}
}
Kostenlos starten →