EUVIMEDEUVIMED entdecken
Crossref

High‐Throughput Fabrication of Large‐Scale Metaholograms via One‐step Printing

Chanwoong Park, Wonjoong Kim, Yeseul Kim, Hansang Sung, Jaein Park, Hyoin Song, Joohoon Kim, Dong Kyo Oh, Hyunjung Kang, Nara Jeon, Junsuk Rho, Heon Lee

Advanced Optical Materials · 2024-03 · 12 (9)

DOI: 10.1002/adom.202301562 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Optical Materials, online erschienen am 11.03.2024. Verfasst von Chanwoong Park und 11 weiteren Autor:innen. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Research Foundation of Korea, Korea Evaluation Institute of Industrial Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metasurfaces, which are designed by arranging meta‐atoms, have attracted attention for their ability to create optical properties that do not exist in nature. However, previous methods for fabricating metasurfaces using electron‐beam lithography (EBL) are expensive and have limited production capacity, inhibiting mass production. In this study, a new manufacturing method is demonstrated using an argon fluoride (ArF) scanner and nanoimprint lithography (NIL) to overcome these limitations. 266 millimeter‐scale metasurfaces are designed and fabricated on an 8‐inch wafer using an ArF scanner. Subsequently, this is used as a master stamp to replicate the metasurfaces in an 8‐inch wafer scale through the NIL process all at once. To demonstrate the effectiveness of this method, a metahologram is designed and manufactured using TiO 2 nanoparticle‐embedded‐resin (nano‐PER). The metahologram achieves an 81.2% yield during replication, with a maximum efficiency of 60.7% at 450 nm, 45.1% at 532 nm, and 38.5% at 635 nm, respectively. The results demonstrate the production of practical metaholograms using low‐cost and high‐throughput processes.

Förderung

  • National Research Foundation of Korea
  • Korea Evaluation Institute of Industrial Technology

Zitieren

APA

Park, C., Kim, W., Kim, Y., Sung, H., Park, J., Song, H., Kim, J., Oh, D. K., Kang, H., Jeon, N., Rho, J., & Lee, H. (2024). High‐Throughput Fabrication of Large‐Scale Metaholograms via One‐step Printing. Advanced Optical Materials, 12(9). https://doi.org/10.1002/adom.202301562

Vancouver

Park C, Kim W, Kim Y, Sung H, Park J, Song H, et al. High‐Throughput Fabrication of Large‐Scale Metaholograms via One‐step Printing. Advanced Optical Materials. 2024;12(9). doi:10.1002/adom.202301562

BibTeX
@article{Park2024,
  author = {Park, Chanwoong and Kim, Wonjoong and Kim, Yeseul and Sung, Hansang and Park, Jaein and Song, Hyoin and Kim, Joohoon and Oh, Dong Kyo and Kang, Hyunjung and Jeon, Nara and Rho, Junsuk and Lee, Heon},
  title = {High‐Throughput Fabrication of Large‐Scale Metaholograms via One‐step Printing},
  journal = {Advanced Optical Materials},
  year = {2024},
  volume = {12},
  number = {9},
  doi = {10.1002/adom.202301562}
}
Kostenlos starten →