EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Fabrication of High‐Responsivity Sb 2 Se 3 ‐Based Photodetectors through Selenization Process

Su‐Kyung Kim, Hee‐Kyoung You, Kwang‐Ro Yun, Jong‐Ho Kim, Tae‐Yeon Seong

Advanced Optical Materials · 2023-04 · 11 (7)

DOI: 10.1002/adom.202202625 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Optical Materials, online erschienen am 08.02.2023. Verfasst von Su‐Kyung Kim und 4 weiteren Autor:innen. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Research Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sb 2 Se 3 has great potential for applications in near‐infrared sensors because of its narrow bandgap, environmental friendliness, and high absorption coefficient. However, the low conductivity of Sb 2 Se 3 is an obstacle to the further development of high‐performance optoelectronic devices. In this study, to address this challenge, the selenization process is adopted. The incorporation of Se atoms into Sb 2 Se 3 facilitates the crystallization of the films and the formation of [ hk 0]‐textured grains at a lower temperature than unselenized Sb 2 Se 3 . The selenized films possess larger grains than the unselenized ones at the same temperature. X‐ray photoelectron spectroscopy (XPS) results show that annealing causes the generation of donor‐like point defects (e.g., V se and Sb Se ) and SeO 2 . The 250 °C‐annealed selenized Sb 2 Se 3 ‐based photodetectors (PDs) have a high responsivity of 1130 mW A −1 and a specific detectivity of 4.62 × 10 11 Jones. The PDs exhibit a fast response time (i.e., rise/fall time of 4.54 ms/8.50 ms), sensitivity of 94.2 at 20 mW cm −2 , and external quantum efficiency of 155% at 200 µW cm −2 . Further, the selenized PDs have good stability to moisture and air. Based on the XPS, X‐ray diffraction, and transmission electron microscope results, the improved performance of the selenized Sb 2 Se 3 ‐based PDs is described and discussed.

Förderung

  • National Research Foundation

Zitieren

APA

Kim, S., You, H., Yun, K., Kim, J., & Seong, T. (2023). Fabrication of High‐Responsivity Sb 2 Se 3 ‐Based Photodetectors through Selenization Process. Advanced Optical Materials, 11(7). https://doi.org/10.1002/adom.202202625

Vancouver

Kim S, You H, Yun K, Kim J, Seong T. Fabrication of High‐Responsivity Sb 2 Se 3 ‐Based Photodetectors through Selenization Process. Advanced Optical Materials. 2023;11(7). doi:10.1002/adom.202202625

BibTeX
@article{Kim2023,
  author = {Kim, Su‐Kyung and You, Hee‐Kyoung and Yun, Kwang‐Ro and Kim, Jong‐Ho and Seong, Tae‐Yeon},
  title = {Fabrication of High‐Responsivity Sb 2 Se 3 ‐Based Photodetectors through Selenization Process},
  journal = {Advanced Optical Materials},
  year = {2023},
  volume = {11},
  number = {7},
  doi = {10.1002/adom.202202625}
}
Kostenlos starten →