High‐Speed Broadband Self‐Powered Photodetectors Based on Tin Sulfide/Graphitic Carbon Nitride Composites for Environmental Monitoring
Advanced Materials Technologies · 2026-10 · 11 (20)
DOI: 10.1002/admt.71237 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 11.08.2026. Verfasst von Bhavasree Sreedhar und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 73 Literaturangaben.
Abstract (Originalsprache)
Developing photodetectors with rapid response, broad spectral coverage, and self‐powered operation remains a major challenge since they are mutually exclusive. This challenge is tackled by compositing tin sulfide (SnS) and graphitic carbon nitride (g‐C 3 N 4 ) through a controlled incorporation of g‐C 3 N 4 (0.5–15 wt.%), to modulate depletion width, band alignment, and surface defects. The optimized composite (1 wt.% g‐ C 3 N 4 , named SG‐1) exhibits broadband absorption spanning 250–1400 nm, a strong zero‐bias photocurrent (2.24 µA), and rapid rise/decay times of 0.48/0.47 ms, which are among the fastest reported for SnS‐based photodetectors. Scanning Kelvin probe (SKP) analysis reveals a pronounced illumination‐induced work‐function modulation (ΔWF ≈ 0.23 eV), confirming enhanced built‐in field and reduced surface defect density. Correspondingly, SG‐1 achieves a responsivity of 2.8 mA/W and a detectivity of 1.9 × 10 9 Jones that is ∼4× greater than pristine SnS. The combined optical, electrical, and contact potential difference (CPD) establishes that g‐C 3 N 4 ‐driven depletion modulation is instrumental for rapid carrier dynamics. These results validate SnS/g‐C 3 N 4 composites as promising candidates for next‐generation ultrabroadband, low‐power, and high‐speed photodetectors for environmental sensing, optical communication, and IoT‐integrated systems.
Zitieren
APA
Sreedhar, B., Sasidharan, N. T., Bora, A., Annamalai, K., Sivalingam, Y., & Elamurugu, E. (2026). High‐Speed Broadband Self‐Powered Photodetectors Based on Tin Sulfide/Graphitic Carbon Nitride Composites for Environmental Monitoring. Advanced Materials Technologies, 11(20). https://doi.org/10.1002/admt.71237
Vancouver
Sreedhar B, Sasidharan NT, Bora A, Annamalai K, Sivalingam Y, Elamurugu E. High‐Speed Broadband Self‐Powered Photodetectors Based on Tin Sulfide/Graphitic Carbon Nitride Composites for Environmental Monitoring. Advanced Materials Technologies. 2026;11(20). doi:10.1002/admt.71237
BibTeX
@article{Sreedhar2026,
author = {Sreedhar, Bhavasree and Sasidharan, Nivin Thulasibai and Bora, Arbacheena and Annamalai, Karthigeyan and Sivalingam, Yuvaraj and Elamurugu, Elangovan},
title = {High‐Speed Broadband Self‐Powered Photodetectors Based on Tin Sulfide/Graphitic Carbon Nitride Composites for Environmental Monitoring},
journal = {Advanced Materials Technologies},
year = {2026},
volume = {11},
number = {20},
doi = {10.1002/admt.71237}
}
EUVIMED