EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Controlling Film Formation in Inkjet‐printed MAPbBr 3 Through Graphene Incorporation for Enhanced Photodetection

Kenneth Lobo, Javier Bartolomé, María Vila, Giovanni Vescio, Raúl I. Sánchez‐Alarcón, Junaid Khan, Júlia Marí Guaita, Francisco Palacio Bonet, Juan P. Martínez‐Pastor, Sergi Hernández, Blas Garrido, Carmen Coya und 1 weitere

Advanced Materials Technologies · 2026-08 · 11 (15)

DOI: 10.1002/admt.202600007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 27.03.2026. Verfasst von Kenneth Lobo und 12 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ministerio de Ciencia, Innovación y Universidades, Universidad Rey Juan Carlos, Comunidad de Madrid.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The exceptional optoelectronic properties and solution processability of metal halide perovskites make them promising candidates for realizing high‐performance devices via additive manufacturing techniques like printing. The composition of inks used therein plays a vital role in thin film formation, critically influencing optical conversion and electrical transport in devices. However, understanding and controlling film formation in printed perovskite layers remains largely elusive. Presented herein are investigations on the influence of adding graphene flakes into precursor inks of methylammonium lead bromide (MAPbBr 3 ) for enhancing printed photodetector performance. Direct visualization of the film formation process suggests that the graphene flakes induce a delay in nucleation and modulate crystallization kinetics, promoting a transition from isolated island growth to extended dendritic structures. While optical properties remained unaffected, longer carrier lifetimes, homogeneity in composition, and lowering of work functions were observed in films containing graphene, leading to superior device performance. With single‐pass printing, photodetectors with responsivities up to 3.54 A·W −1 , detectivities ∼ 10 12 Jones, and fast response time < 85 ms were realized. These findings present an alternative approach through graphene‐in‐ink formulation, revealing the importance of controlled film formation and paving a unique pathway for improvisation in printed devices.

Förderung

  • Ministerio de Ciencia, Innovación y Universidades
  • Universidad Rey Juan Carlos
  • Comunidad de Madrid

Zitieren

APA

Lobo, K., Bartolomé, J., Vila, M., Vescio, G., Sánchez‐Alarcón, R. I., Khan, J., Guaita, J. M., Bonet, F. P., Martínez‐Pastor, J. P., Hernández, S., Garrido, B., Coya, C., & Cirera, A. (2026). Controlling Film Formation in Inkjet‐printed MAPbBr 3 Through Graphene Incorporation for Enhanced Photodetection. Advanced Materials Technologies, 11(15). https://doi.org/10.1002/admt.202600007

Vancouver

Lobo K, Bartolomé J, Vila M, Vescio G, Sánchez‐Alarcón RI, Khan J, et al. Controlling Film Formation in Inkjet‐printed MAPbBr 3 Through Graphene Incorporation for Enhanced Photodetection. Advanced Materials Technologies. 2026;11(15). doi:10.1002/admt.202600007

BibTeX
@article{Lobo2026,
  author = {Lobo, Kenneth and Bartolomé, Javier and Vila, María and Vescio, Giovanni and Sánchez‐Alarcón, Raúl I. and Khan, Junaid and Guaita, Júlia Marí and Bonet, Francisco Palacio and Martínez‐Pastor, Juan P. and Hernández, Sergi and Garrido, Blas and Coya, Carmen and Cirera, Albert},
  title = {Controlling Film Formation in Inkjet‐printed MAPbBr 3 Through Graphene Incorporation for Enhanced Photodetection},
  journal = {Advanced Materials Technologies},
  year = {2026},
  volume = {11},
  number = {15},
  doi = {10.1002/admt.202600007}
}
Kostenlos starten →