EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Scalable Layer‐by‐Layer Electrospray‐Assisted Interfacial Polymerization: Enabling Large‐Area Polyamide Membrane Fabrication

Yue Feng, Feng Gao, Mert Can Hacifazlioglu, Jason Zhao, Jeffrey R. McCutcheon, Yuepeng Zhang

Advanced Materials Technologies · 2026-05 · 11 (10)

DOI: 10.1002/admt.202502017 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 11.02.2026. Verfasst von Yue Feng und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Layer‐by‐layer electrospray‐assisted interfacial polymerization (LBL‐EAIP) has recently been proposed as an alternative approach for fabricating polyamide membranes with precisely controlled thickness and polymerization degree, showing great potential for reverse osmosis (RO) membrane synthesis. In this article, we report a scale‐up strategy for LBL‐EAIP to enable its practical application in RO membrane manufacturing. A multi‐jet electrospray apparatus was developed, and the device configuration and process parameters were carefully adjusted to produce polyamide‐on‐polyethersulfone thin film composite (TFC) membranes with consistently high salt rejection and water permeance across the membrane area. Specifically, an average 97.1% NaCl rejection from a 2000 ppm NaCl feed was achieved with an area‐to‐area deviation of 1%, along with a deionized water permeance of 0.90 ± 0.11 LMH/bar at 15 bar feed pressure. In addition, a Fourier‐transform infrared spectroscopy (FTIR)‐based analytical method was developed for semi‐quantitative assessment of membrane thickness and compositional uniformity, enabling rapid mapping of film microstructure and chemical variations. This work provides a pathway to scale up LBL‐EAIP technology, bridging the gap between laboratory‐scale innovation and industrial‐scale manufacturing.

Zitieren

APA

Feng, Y., Gao, F., Hacifazlioglu, M. C., Zhao, J., McCutcheon, J. R., & Zhang, Y. (2026). Scalable Layer‐by‐Layer Electrospray‐Assisted Interfacial Polymerization: Enabling Large‐Area Polyamide Membrane Fabrication. Advanced Materials Technologies, 11(10). https://doi.org/10.1002/admt.202502017

Vancouver

Feng Y, Gao F, Hacifazlioglu MC, Zhao J, McCutcheon JR, Zhang Y. Scalable Layer‐by‐Layer Electrospray‐Assisted Interfacial Polymerization: Enabling Large‐Area Polyamide Membrane Fabrication. Advanced Materials Technologies. 2026;11(10). doi:10.1002/admt.202502017

BibTeX
@article{Feng2026,
  author = {Feng, Yue and Gao, Feng and Hacifazlioglu, Mert Can and Zhao, Jason and McCutcheon, Jeffrey R. and Zhang, Yuepeng},
  title = {Scalable Layer‐by‐Layer Electrospray‐Assisted Interfacial Polymerization: Enabling Large‐Area Polyamide Membrane Fabrication},
  journal = {Advanced Materials Technologies},
  year = {2026},
  volume = {11},
  number = {10},
  doi = {10.1002/admt.202502017}
}
Kostenlos starten →