Evaluation of Strain and Charge‐Transfer Doping in Wet‐Polymeric Transferred Monolayer MoS 2 : Implications for Field Effect Transistors
Advanced Materials Technologies · 2026-05 · 11 (9)
DOI: 10.1002/admt.202501920 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 29.01.2026. Verfasst von Choudhury Abinash Bhuyan und 9 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 68 Literaturangaben.
Abstract (Originalsprache)
Unlike as‐grown two‐dimensional (2D) materials, transfer onto arbitrary substrates is essential for integration with semiconductor technologies, deterministic moiré superlattices, and flexible circuitry. However, polymeric residues introduced during the film‐transfer process critically modify strain and doping profiles, impeding device fidelity. We investigate the impact of polymer residues from two widely used 2D film transfer techniques: wet‐chemical etching (polymethyl methacrylate (PMMA)‐based) and surface‐energy‐assisted transfer (polystyrene (PS)‐based) of monolayer MoS 2 (1L‐MoS 2 ) film. We demonstrate that PMMA residues induce biaxial tensile strain (0.07%) and p ‐type doping (hole density ∼0.74 × 10 13 cm −2 ) in residue‐covered regions, while uncovered areas exhibit compressive strain (0.11%). Conversely, PS residues nearly uniformly introduce compressive strain (0.17%) and n ‐type doping (electron density ∼0.89 × 10 13 cm −2 ). Kelvin probe force microscopy confirms polymer‐induced doping, and density functional theory calculations support the experimental observations. Field‐effect transistor measurements validate these doping trends, revealing p ‐type (threshold voltage −9.85 V) and n ‐type (threshold voltage −18.25 V) behavior for 1L‐MoS 2 channel material transferred using PMMA and PS polymers, respectively. The surface‐energy‐assisted transfer method minimizes structural defects, yielding superior device performance with higher ON/OFF ratios (10 6 ) and estimated mobility (10.3 cm 2 V −1 s −1 ). Our results demonstrate that the transfer methodology provides guidelines for optimizing 1L‐MoS 2 for high‐performance optoelectronic applications.
Zitieren
APA
Bhuyan, C. A., Warrier, A. R., Madapu, K. K., Kaur, G., Prabakar, K. M., Pradhan, J., Sinha, S. K., Ghosh, C., Polaki, S. R., & Dhara, S. (2026). Evaluation of Strain and Charge‐Transfer Doping in Wet‐Polymeric Transferred Monolayer MoS 2 : Implications for Field Effect Transistors. Advanced Materials Technologies, 11(9). https://doi.org/10.1002/admt.202501920
Vancouver
Bhuyan CA, Warrier AR, Madapu KK, Kaur G, Prabakar KM, Pradhan J, et al. Evaluation of Strain and Charge‐Transfer Doping in Wet‐Polymeric Transferred Monolayer MoS 2 : Implications for Field Effect Transistors. Advanced Materials Technologies. 2026;11(9). doi:10.1002/admt.202501920
BibTeX
@article{Bhuyan2026,
author = {Bhuyan, Choudhury Abinash and Warrier, Akhil R. and Madapu, Kishore K. and Kaur, Gurpreet and Prabakar, Krishna Murthy and Pradhan, Jagnaseni and Sinha, Shyam K. and Ghosh, Chanchal and Polaki, Shyamala Rao and Dhara, Sandip},
title = {Evaluation of Strain and Charge‐Transfer Doping in Wet‐Polymeric Transferred Monolayer MoS 2 : Implications for Field Effect Transistors},
journal = {Advanced Materials Technologies},
year = {2026},
volume = {11},
number = {9},
doi = {10.1002/admt.202501920}
}
EUVIMED