Scalable Fabrication of Electrochemical Sensors Via Inkjet Printing of Functionalized Graphene for Pesticide Detection
Advanced Materials Technologies · 2026-01 · 11 (1)
DOI: 10.1002/admt.202501765 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 25.09.2025. Verfasst von Martin‐Alex Nalepa und 7 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission, Ministerstvo Školství, Mládeže a Tělovýchovy, Ministerstvo Životního Prostředí.
Abstract (Originalsprache)
Nanomaterials are widely employed to enhance the performance of electrochemical sensors by modifying electrode surfaces. Traditionally, screen‐printed electrodes are manually coated with nanomaterial dispersions using the drop‐casting method, which suffers from poor reproducibility and limited reusability due to inconsistencies in deposition. This study introduces a novel electrochemical sensor based on nitrogen‐doped graphene acid (NGA), deposited via inkjet printing. This approach provides uniform, reproducible, and mechanically stable NGA coatings with significantly reduce material consumption (≈3 vs. ≈15 µg) compared to drop‐casting. The NGA‐modified electrodes exhibit enhanced electrochemical performance, as confirmed by a fourfold decrease in charge transfer resistance and a 2.5‐fold increase in current response. The sensor reliably detects imidacloprid, a common neonicotinoid pesticide, with excellent selectivity and long‐term stability exceeding 110 days. Inkjet printing enables precise material placement and layer control, ensuring strong adhesion and consistent performance even under mechanical stress and in complex matrices like tap water. This work demonstrates the potential of inkjet printing as a scalable and cost‐effective strategy for producing high‐performance electrochemical sensors.
Förderung
- European Commission
- Ministerstvo Školství, Mládeže a Tělovýchovy
- Ministerstvo Životního Prostředí
Zitieren
APA
Nalepa, M., Kulla, L., Jakubec, P., Hrubý, V., Panáček, D., Dědek, I., Vasjari, M., & Otyepka, M. (2026). Scalable Fabrication of Electrochemical Sensors Via Inkjet Printing of Functionalized Graphene for Pesticide Detection. Advanced Materials Technologies, 11(1). https://doi.org/10.1002/admt.202501765
Vancouver
Nalepa M, Kulla L, Jakubec P, Hrubý V, Panáček D, Dědek I, et al. Scalable Fabrication of Electrochemical Sensors Via Inkjet Printing of Functionalized Graphene for Pesticide Detection. Advanced Materials Technologies. 2026;11(1). doi:10.1002/admt.202501765
BibTeX
@article{Nalepa2026,
author = {Nalepa, Martin‐Alex and Kulla, Lueda and Jakubec, Petr and Hrubý, Vítězslav and Panáček, David and Dědek, Ivan and Vasjari, Majlinda and Otyepka, Michal},
title = {Scalable Fabrication of Electrochemical Sensors Via Inkjet Printing of Functionalized Graphene for Pesticide Detection},
journal = {Advanced Materials Technologies},
year = {2026},
volume = {11},
number = {1},
doi = {10.1002/admt.202501765}
}
EUVIMED