EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Printing of Highly Dense and Translucent Zirconia Parts for Dental Applications: Effect of Filament Overlapping

Juliana de Freitas Gouveia Silva, Manuel Fellipe Rodrigues Pais Alves, Ana Carolina da Silva, Tiago Moreira Bastos Campos, Renata Marques De Melo, Susana Maria Henriques Olhero

Advanced Materials Technologies · 2026-06 · 11 (12)

DOI: 10.1002/admt.202501624 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 14.03.2026. Verfasst von Juliana de Freitas Gouveia Silva und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e a Tecnologia, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, European Regional Development Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A 5Y‐PSZ zirconia paste was formulated for extrusion‐based additive manufacturing via Direct Ink Writing (DIW) to produce dense ceramic components for dental applications. A colloidal approach was adopted using nanometric zirconia powder (47 vol%) with tailored dispersant, thickener, and flocculant agents. Rheological behavior was evaluated by shear viscosity, viscoelastic moduli, and three‐step thixotropy tests to ensure printability and shape stability. Specimens were printed with different filament overlap percentages (20%, 25%, and 30%) and compared with a control group obtained by uniaxial pressing. After sintering, all groups were characterized in terms of relative density, microstructure (SEM), phase composition (XRD), translucency, and biaxial flexural strength. The 30% overlap printed group achieved average densification above 99%, optical translucency comparable to the pressed controls, and flexural strength of 432 ± 37 MPa. Weibull analysis of 30% filament overlap group indicated σ 0 = 420 MPa and m = 7.0, comparable to the pressed group (σ 0 = 658 MPa; m = 7.3). Overall, this study establishes a robust formulation and processing route for DIW of 5Y‐PSZ with high densification, translucency, and mechanical reliability, fulfilling ISO 6872 and offering a viable alternative for dental applications. This is the first study demonstrating filament overlaps as a densification‐enhancing parameter for DIW zirconia.

Förderung

  • Fundação para a Ciência e a Tecnologia
  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
  • European Regional Development Fund

Zitieren

APA

Silva, J. D. F. G., Alves, M. F. R. P., Silva, A. C. D., Campos, T. M. B., Melo, R. M. D., & Olhero, S. M. H. (2026). 3D Printing of Highly Dense and Translucent Zirconia Parts for Dental Applications: Effect of Filament Overlapping. Advanced Materials Technologies, 11(12). https://doi.org/10.1002/admt.202501624

Vancouver

Silva JDFG, Alves MFRP, Silva ACD, Campos TMB, Melo RMD, Olhero SMH. 3D Printing of Highly Dense and Translucent Zirconia Parts for Dental Applications: Effect of Filament Overlapping. Advanced Materials Technologies. 2026;11(12). doi:10.1002/admt.202501624

BibTeX
@article{Silva2026,
  author = {Silva, Juliana de Freitas Gouveia and Alves, Manuel Fellipe Rodrigues Pais and Silva, Ana Carolina da and Campos, Tiago Moreira Bastos and Melo, Renata Marques De and Olhero, Susana Maria Henriques},
  title = {3D Printing of Highly Dense and Translucent Zirconia Parts for Dental Applications: Effect of Filament Overlapping},
  journal = {Advanced Materials Technologies},
  year = {2026},
  volume = {11},
  number = {12},
  doi = {10.1002/admt.202501624}
}
Kostenlos starten →