EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Flexible 3D‐Printed Cellulosic Constructs for EMI Shielding and Piezoresistive Sensing

Majed Amini, Seyyed Alireza Hashemi, Zhengyang Yu, Ahmadreza Ghaffarkhah, Milad Kamkar, Feng Jiang, Mohammad Arjmand

Advanced Materials Technologies · 2025-05 · 10 (10)

DOI: 10.1002/admt.202401898 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 29.01.2025. Verfasst von Majed Amini und 6 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Advances in materials science and sustainability have positioned cellulose nanofibers (CNFs) as an important nanomaterial for creating complex 3D architectures through 3D printing techniques. However, the inherent limitations of 3D‐printed CNF‐based materials, such as poor electrical conductivity and restricted mechanical flexibility, pose barriers to their application in next‐generation electronics. The research addresses these challenges by integrating CNF‐based 3D printed frameworks with a conductive polymer via a process known as “cold chemical vapor polymerization” (CCVP). The procedure initiates with the direct ink writing (DIW) of the CNF hydrogel, which then undergoes saturation with Fe 3+ ions and freeze‐drying to produce ion‐embedded CNF frameworks. Subsequently, interconnected conductive pathways of poly(3,4‐ethylenedioxythiophene) (PEDOT) are generated within these structures using CCVP. This methodology allows for precise customization of electrical conductivity, resulting in the production of highly conductive (546 S m −1 ) and mechanically flexible (70% compressible) patterned constructs. This advancement is highlighted by the development of grid‐based structures designed for electromagnetic interference (EMI) shields. These innovative shields demonstrate an absorbance of 0.71 and a specific EMI shielding effectiveness of 3406.45 dB cm 2 g −1 . Furthermore, these aerogels function as highly sensitive piezoresistive sensors, demonstrating the versatility of this sustainable approach for advancing wearable electronics and multifunctional technologies.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Amini, M., Hashemi, S. A., Yu, Z., Ghaffarkhah, A., Kamkar, M., Jiang, F., & Arjmand, M. (2025). Flexible 3D‐Printed Cellulosic Constructs for EMI Shielding and Piezoresistive Sensing. Advanced Materials Technologies, 10(10). https://doi.org/10.1002/admt.202401898

Vancouver

Amini M, Hashemi SA, Yu Z, Ghaffarkhah A, Kamkar M, Jiang F, et al. Flexible 3D‐Printed Cellulosic Constructs for EMI Shielding and Piezoresistive Sensing. Advanced Materials Technologies. 2025;10(10). doi:10.1002/admt.202401898

BibTeX
@article{Amini2025,
  author = {Amini, Majed and Hashemi, Seyyed Alireza and Yu, Zhengyang and Ghaffarkhah, Ahmadreza and Kamkar, Milad and Jiang, Feng and Arjmand, Mohammad},
  title = {Flexible 3D‐Printed Cellulosic Constructs for EMI Shielding and Piezoresistive Sensing},
  journal = {Advanced Materials Technologies},
  year = {2025},
  volume = {10},
  number = {10},
  doi = {10.1002/admt.202401898}
}
Kostenlos starten →