Silicon Nanoribbon Arrays Based Printed Multifunctional Flexible Photovoltaic Microcells
Advanced Materials Technologies · 2024-11 · 9 (21)
DOI: 10.1002/admt.202400728 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 22.06.2024. Verfasst von Ayoub Zumeit und 5 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 84 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The photovoltaic devices offer promising eco‐friendly solution for self‐powered flexible electronics. However, their fabrication on flexible substrate is not easy due to mismatches between the requirements of conventional microfabrication and the thermal, and mechanical features of the substrates. Herein, direct roll printed nanoscale photoactive electronic layers are presented, which are further processed to develop ≈315 µm 2 sized miniaturized photovoltaic microcells. Using a set of 32 microcells, connected in parallel configuration, indoor light harvesting is shown at a maximum power density of ≈10 µW cm −2 under white LED illumination. Further, the dual functionality of developed microcells i.e., energy harvesting as well as wideband photodetection is demonstrated. As self‐powered photo sensors the developed photovoltaic microcells exhibit distinctive photo responses under white LED‐UV (365 nm)‐ NIR (850 nm) light illumination, with exceptionally high‐speed response (rise time τ Rise = 205 µs and fall time τ Fall = 2000 µs), and a peak responsivity of 2.48 A W −1 to UV light at zero bias voltage. The presented results show the potential usage of printed multifunctional photovoltaic microcells in a wide variety of applications such as self‐powered wearable and flexible electronic systems for health monitoring and indoor robotics.
Zitieren
APA
Zumeit, A., Dahiya, A. S., Nair, N. M., Christou, A., Ma, S., & Dahiya, R. (2024). Silicon Nanoribbon Arrays Based Printed Multifunctional Flexible Photovoltaic Microcells. Advanced Materials Technologies, 9(21). https://doi.org/10.1002/admt.202400728
Vancouver
Zumeit A, Dahiya AS, Nair NM, Christou A, Ma S, Dahiya R. Silicon Nanoribbon Arrays Based Printed Multifunctional Flexible Photovoltaic Microcells. Advanced Materials Technologies. 2024;9(21). doi:10.1002/admt.202400728
BibTeX
@article{Zumeit2024,
author = {Zumeit, Ayoub and Dahiya, Abhishek Singh and Nair, Nitheesh M. and Christou, Adamos and Ma, Sihang and Dahiya, Ravinder},
title = {Silicon Nanoribbon Arrays Based Printed Multifunctional Flexible Photovoltaic Microcells},
journal = {Advanced Materials Technologies},
year = {2024},
volume = {9},
number = {21},
doi = {10.1002/admt.202400728}
}
EUVIMED