EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi‐Material Gradient Printing Using Meniscus‐enabled Projection Stereolithography (MAPS)

Puskal Kunwar, Arun Poudel, Ujjwal Aryal, Rui Xie, Zachary J Geffert, Haven Wittmann, Daniel Fougnier, Tsung Hsing Chiang, Mathew M Maye, Zhen Li, Pranav Soman

Advanced Materials Technologies · 2025-03 · 10 (6)

DOI: 10.1002/admt.202400675 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 15.11.2024. Verfasst von Puskal Kunwar und 10 weiteren Autor:innen. Beteiligte Einrichtung: Syracuse University, Biomedical, and Chemical Engineering Department, Syracuse, New York, 13210, USA. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIGMS NIH HHS, National Institutes of Health, Clemson University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Light‐based additive manufacturing methods are widely used to print high‐resolution 3D structures for applications in tissue engineering, soft robotics, photonics, and microfluidics, among others. Despite this progress, multi‐material printing with these methods remains challenging due to constraints associated with hardware modifications, control systems, cross‐contamination, waste, and resin properties. Here, a new printing platform coined Meniscus‐enabled Projection Stereolithography (MAPS) is reported, a vat‐free method that relies on generating and maintaining a resin meniscus between a crosslinked structure and bottom window to print lateral, vertical, discrete, or gradient multi‐material 3D structures with no waste and user‐defined mixing between layers. MAPS is compatible with a wide range of resins shown and can print complex multi‐material 3D structures without requiring specialized hardware, software, or complex washing protocols. MAPS's ability to print structures with microscale variations in mechanical stiffness, opacity, surface energy, cell densities, and magnetic properties provides a generic method to make advanced materials for a broad range of applications.

Schlagwörter

Stichwörter der Autor:innen

bioprintingdigital light processinggradient printingmeniscusmulti-material printingnano-material printing

Autor:innen und Institutionen

  • Syracuse University, Biomedical, and Chemical Engineering Department, Syracuse, New York, 13210, USA.
  • BioInspired Institute, Syracuse, New York, 13210, USA.
  • Syracuse University, Department of Chemistry, Syracuse, New York, 13210, USA.
  • Clemson University, Department of Mechanical Engineering, Clemson, SC 29634.

Förderung

  • NIGMS NIH HHS
  • National Institutes of Health
  • Clemson University
  • National Science Foundation

Zitieren

APA

Kunwar, P., Poudel, A., Aryal, U., Xie, R., Geffert, Z. J., Wittmann, H., Fougnier, D., Chiang, T. H., Maye, M. M., Li, Z., & Soman, P. (2025). Multi‐Material Gradient Printing Using Meniscus‐enabled Projection Stereolithography (MAPS). Advanced Materials Technologies, 10(6). https://doi.org/10.1002/admt.202400675

Vancouver

Kunwar P, Poudel A, Aryal U, Xie R, Geffert ZJ, Wittmann H, et al. Multi‐Material Gradient Printing Using Meniscus‐enabled Projection Stereolithography (MAPS). Advanced Materials Technologies. 2025;10(6). doi:10.1002/admt.202400675

BibTeX
@article{Kunwar2025,
  author = {Kunwar, Puskal and Poudel, Arun and Aryal, Ujjwal and Xie, Rui and Geffert, Zachary J and Wittmann, Haven and Fougnier, Daniel and Chiang, Tsung Hsing and Maye, Mathew M and Li, Zhen and Soman, Pranav},
  title = {Multi‐Material Gradient Printing Using Meniscus‐enabled Projection Stereolithography (MAPS)},
  journal = {Advanced Materials Technologies},
  year = {2025},
  volume = {10},
  number = {6},
  doi = {10.1002/admt.202400675}
}
Kostenlos starten →