EUVIMEDEUVIMED entdecken
Crossref

Novel Fast Cure Silicone Inks for Single‐Step, Support‐Free 3D Printing of Tall, Overhanging, and High Aspect Ratio Structures

Anna Guell Izard, Lemuel X. Pérez Pérez, Todd H. Weisgraber, Ilse M. Van Meerbeek, Alexandra M. Golobic, Eric B. Duoss, Jeremy M. Lenhardt

Advanced Materials Technologies · 2024-10 · 9 (19)

DOI: 10.1002/admt.202400423 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 05.05.2024. Verfasst von Anna Guell Izard und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: U.S. Department of Energy, Lawrence Livermore National Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicone elastomers have a broad variety of applications, such as soft robotics, biomedical devices, and structural metamaterials. The extrusion‐based method known as direct ink write (DIW) has enabled the production of additively manufactured silicone structures. However, this method is limited to manufacturing mostly planar or pseudo‐3D structures. Due to the low self‐supporting capabilities of extruded strands for traditional silicone‐based “inks,” obtaining tall or overhanging structures, or structures comprised by thin walls is not feasible. Here, a novel Fast Cure silicone‐based ink is demonstrated that enables manufacturing of complex 3D structures. The Fast Cure ink is a two‐part mixture and silicone structures are produced by inline mixing and coextrusion of a part containing a catalyst (part A) and a part containing a crosslinker (part B). By the virtue of crosslinking, the extruded strands rapidly rigidize, increasing their self‐supportive capacity. Hence, structures can be obtained with superior shape retention and previously unobtainable parts are realized that are tall, with aspect ratios higher than 3, and have overhanging features, achieving inclination angles smaller than 35° with respect to the printing plane. These minimal sag parts are achieved without requiring extra curing or mechanisms, support structures, or suspension baths.

Förderung

  • U.S. Department of Energy
  • Lawrence Livermore National Laboratory

Zitieren

APA

Izard, A. G., Pérez, L. X. P., Weisgraber, T. H., Meerbeek, I. M. V., Golobic, A. M., Duoss, E. B., & Lenhardt, J. M. (2024). Novel Fast Cure Silicone Inks for Single‐Step, Support‐Free 3D Printing of Tall, Overhanging, and High Aspect Ratio Structures. Advanced Materials Technologies, 9(19). https://doi.org/10.1002/admt.202400423

Vancouver

Izard AG, Pérez LXP, Weisgraber TH, Meerbeek IMV, Golobic AM, Duoss EB, et al. Novel Fast Cure Silicone Inks for Single‐Step, Support‐Free 3D Printing of Tall, Overhanging, and High Aspect Ratio Structures. Advanced Materials Technologies. 2024;9(19). doi:10.1002/admt.202400423

BibTeX
@article{Izard2024,
  author = {Izard, Anna Guell and Pérez, Lemuel X. Pérez and Weisgraber, Todd H. and Meerbeek, Ilse M. Van and Golobic, Alexandra M. and Duoss, Eric B. and Lenhardt, Jeremy M.},
  title = {Novel Fast Cure Silicone Inks for Single‐Step, Support‐Free 3D Printing of Tall, Overhanging, and High Aspect Ratio Structures},
  journal = {Advanced Materials Technologies},
  year = {2024},
  volume = {9},
  number = {19},
  doi = {10.1002/admt.202400423}
}
Kostenlos starten →