EUVIMEDEUVIMED entdecken
Crossref

Extrusion‐Based Additive Manufacturing of Carbonaceous and Non‐Carbonaceous Electrode Materials for Electrochemical Energy Storage Devices

Ali Asghar, Karim Khan, Muhammad Shahid Rashid, Muhammad Hamza, Zhiyuan Liu, Changyong Liu, Zhangwei Chen

Advanced Materials Technologies · 2025-02 · 10 (3)

DOI: 10.1002/admt.202400136 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 20.07.2024. Verfasst von Ali Asghar und 6 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 286 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recently, additive manufacturing (AM), also known as 3D printing, has become a more attractive fabrication technology in various fields, such as electrochemical energy storage devices (EESDs). Therefore, 3D printing technologies allow the fabrication of the desired complex structure, which reduces the fabrication method time and cost for prototyping novel processes. The excellent electrochemical properties, structure stability, simplistic integration, flexibility, ion/charge transportation, high energy and power densities, surface kinetics, and high efficiency are essential features of novel EESDs like batteries and supercapacitors (SCs). Herein, first, the extrusion‐based AM technology, such as direct ink writing (DIW) and fused deposition modeling (FDM), utilized to improve the following parameters through designated electrode patterns and device configuration compared to conventional electrode fabrication methods is discussed. After that, the main parameters of extrusion‐based 3D printing are listed based on the selection of host and active materials, solvent, binders/additive, ink formulation, electrode fabrication and post‐processing treatment, structural porosity, conductive materials with plasticizer, etc., and the recent advancement in sodium‐ and lithium‐based batteries, as well as SCs, is summarized. In the end, the challenges and research direction of extrusion‐based 3D‐printed EESDs in advanced fields that inspire future perspectives and development are discussed.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Asghar, A., Khan, K., Rashid, M. S., Hamza, M., Liu, Z., Liu, C., & Chen, Z. (2025). Extrusion‐Based Additive Manufacturing of Carbonaceous and Non‐Carbonaceous Electrode Materials for Electrochemical Energy Storage Devices. Advanced Materials Technologies, 10(3). https://doi.org/10.1002/admt.202400136

Vancouver

Asghar A, Khan K, Rashid MS, Hamza M, Liu Z, Liu C, et al. Extrusion‐Based Additive Manufacturing of Carbonaceous and Non‐Carbonaceous Electrode Materials for Electrochemical Energy Storage Devices. Advanced Materials Technologies. 2025;10(3). doi:10.1002/admt.202400136

BibTeX
@article{Asghar2025,
  author = {Asghar, Ali and Khan, Karim and Rashid, Muhammad Shahid and Hamza, Muhammad and Liu, Zhiyuan and Liu, Changyong and Chen, Zhangwei},
  title = {Extrusion‐Based Additive Manufacturing of Carbonaceous and Non‐Carbonaceous Electrode Materials for Electrochemical Energy Storage Devices},
  journal = {Advanced Materials Technologies},
  year = {2025},
  volume = {10},
  number = {3},
  doi = {10.1002/admt.202400136}
}
Kostenlos starten →