EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Ester‐Functionalized Polythiophene Interlayers for Enhanced Performance and Stability of Perovskite Solar Cells

Nitish Rai, Saripally Sudhaker Reddy, Andrew D. Scully, K. Lakshani Jayaprada Weerarathna, Udo Bach, Alexandr N. Simonov

Advanced Materials Technologies · 2024-04 · 9 (7)

DOI: 10.1002/admt.202301539 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 04.02.2024. Verfasst von Nitish Rai und 5 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Australian Renewable Energy Agency, Australian Research Council, Australian Centre for Advanced Photovoltaics.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Interfacial defects between the organic–inorganic lead halide perovskite and hole‐transporting layers are one significant factor limiting the performance of the perovskite solar cells (PSCs). These defects typically result from either lead or halide atom vacancies or under‐coordinated Pb 2+ atoms, which act as recombination centers for holes. To address this, it is demonstrated that a thin layer of a poly(bithiophene ester) (PBTE) or a poly(terthiophene diester) (PTTDE) introduced between the FA 0.92 MA 0.08 Pb(I 0.92 Br 0.08 ) 3 (MA + = methylammonium; FA + = formamidinium) perovskite and spiro‐OMeTAD hole transporting material (HTM) layers improves the device stability and power‐conversion efficiency (PCE). The PCE improvements are primarily associated with enhanced open‐circuit voltage and fill factor arising from Lewis‐base passivation of under‐coordinated Pb 2+ through interaction with the polymer carbonyl groups, as well as enhanced charge transfer between the perovskite and HTM layers facilitated by the conjugated thiophene functionalities of the polymeric interlayer. Furthermore, the examined polymers improve the thermal and moisture stability of the devices. Encapsulated PSCs with PBTE and PTTDE retain 89 ± 1 and 94 ± 3% of their initial PCE after 1440 h at 65 °C under 0.5‐sun irradiation, respectively, while PSCs without a polymeric interlayer lose almost half of the performance. These results can guide future designs of polymeric interlayers for high‐performance PSCs.

Förderung

  • Australian Renewable Energy Agency
  • Australian Research Council
  • Australian Centre for Advanced Photovoltaics

Zitieren

APA

Rai, N., Reddy, S. S., Scully, A. D., Weerarathna, K. L. J., Bach, U., & Simonov, A. N. (2024). Ester‐Functionalized Polythiophene Interlayers for Enhanced Performance and Stability of Perovskite Solar Cells. Advanced Materials Technologies, 9(7). https://doi.org/10.1002/admt.202301539

Vancouver

Rai N, Reddy SS, Scully AD, Weerarathna KLJ, Bach U, Simonov AN. Ester‐Functionalized Polythiophene Interlayers for Enhanced Performance and Stability of Perovskite Solar Cells. Advanced Materials Technologies. 2024;9(7). doi:10.1002/admt.202301539

BibTeX
@article{Rai2024,
  author = {Rai, Nitish and Reddy, Saripally Sudhaker and Scully, Andrew D. and Weerarathna, K. Lakshani Jayaprada and Bach, Udo and Simonov, Alexandr N.},
  title = {Ester‐Functionalized Polythiophene Interlayers for Enhanced Performance and Stability of Perovskite Solar Cells},
  journal = {Advanced Materials Technologies},
  year = {2024},
  volume = {9},
  number = {7},
  doi = {10.1002/admt.202301539}
}
Kostenlos starten →