Developing Graphene‐based Conductive Textiles Using Different Coating Methods
Advanced Materials Technologies · 2024-02 · 9 (4)
DOI: 10.1002/admt.202301492 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 04.01.2024. Verfasst von Babak Abdi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this research, a series of graphene‐based conductive textiles is developed by three different coating methods, including dip‐coating (D), airbrushing (A), and filtration (F). The cellulose substrate consists of a blend of cotton and rayon fabric, and the coating formulation is based on a mixture of graphene powder as a conductive filler, polyurethane (PU) as a binder, and poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP) as a thermoplastic co‐binder. The thermogravimetric analysis (TGA) results are used to prove an enhancement in the thermal stability of the coated fabrics. The graphene content of the coated samples is also estimated from the char residue at 800 °C of the TGA profiles. The graphene‐based coating converts the water‐adsorbing cellulose fabric to a hydrophobic surface as the water contact angle raises from 0° to more than 107° after coating. The mechanical properties of the plain cellulose fabric enhance considerably in terms of tensile strength and tensile modulus, where the highest improvement is seen in the Dip‐coating method, with an 89% increase in tensile strength compared to cellulose fabric. The graphene‐based coating developed in this work enhances the physical, thermal, mechanical, and conductivity properties of the plain cellulose substrate. The resulting coated fabrics can be potentially used in wearable smart electronic textiles.
Zitieren
APA
Abdi, B., Tarhini, A., Baniasadi, H., & Tehrani‐Bagha, A. R. (2024). Developing Graphene‐based Conductive Textiles Using Different Coating Methods. Advanced Materials Technologies, 9(4). https://doi.org/10.1002/admt.202301492
Vancouver
Abdi B, Tarhini A, Baniasadi H, Tehrani‐Bagha AR. Developing Graphene‐based Conductive Textiles Using Different Coating Methods. Advanced Materials Technologies. 2024;9(4). doi:10.1002/admt.202301492
BibTeX
@article{Abdi2024,
author = {Abdi, Babak and Tarhini, Ali and Baniasadi, Hossein and Tehrani‐Bagha, Ali R.},
title = {Developing Graphene‐based Conductive Textiles Using Different Coating Methods},
journal = {Advanced Materials Technologies},
year = {2024},
volume = {9},
number = {4},
doi = {10.1002/admt.202301492}
}
EUVIMED