EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Elucidating the Bulk Morphology of Cellulose‐Based Conducting Aerogels with X‐Ray Microtomography

Vasileios K. Oikonomou, Till Dreier, Alexandra Sandéhn, Mohsen Mohammadi, Jakob Lønborg Christensen, Klas Tybrandt, Anders Bjorholm Dahl, Vedrana Andersen Dahl, Martin Bech, Eleni Stavrinidou

Advanced Materials Technologies · 2023-12 · 8 (23)

DOI: 10.1002/admt.202300550 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, 2023-11. Verfasst von Vasileios K. Oikonomou und 9 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Wallenberg Wood Science Center, Vetenskapsrådet, Stiftelsen för Strategisk Forskning.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conducting cellulose composites are promising sustainable functional materials that have found application in energy devices, sensing and water purification. Herein, conducting aerogels are fabricated based on nanofibrillated cellulose and poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate, using the ice templating technique, and their bulk morphology is characterized with X‐ray microtomography. The freezing method (−20 °C in a freezer vs liquid nitrogen) does not impact the mean porosity of the aerogels but the liquid‐N 2 aerogels have smaller pores. The integration of carbon fibers as addressing electrodes prior to freezing results in increased mean porosity and pore size in the liquid‐N 2 aerogels signifying that the carbon fibers alter the morphology of the aerogels when the freezing is fast. Spatially resolved porosity and pore size distributions also reveal that the liquid‐N 2 aerogels are more inhomogeneous. Independent of the freezing method, the aerogels have similar electrochemical properties. For aerogels without carbon fibers, freezer‐aerogels have higher compression modulus and are less stable under cycling compression fatigue test. This can be explained by higher porosity with larger pores in the center of liquid‐N 2 aerogels and thinner pore walls. This work demonstrates that micro‐CT is a powerful tool for characterizing the morphology of aerogels in a non‐destructive and spatially resolved manner.

Förderung

  • Wallenberg Wood Science Center
  • Vetenskapsrådet
  • Stiftelsen för Strategisk Forskning

Zitieren

APA

Oikonomou, V. K., Dreier, T., Sandéhn, A., Mohammadi, M., Christensen, J. L., Tybrandt, K., Dahl, A. B., Dahl, V. A., Bech, M., & Stavrinidou, E. (2023). Elucidating the Bulk Morphology of Cellulose‐Based Conducting Aerogels with X‐Ray Microtomography. Advanced Materials Technologies, 8(23). https://doi.org/10.1002/admt.202300550

Vancouver

Oikonomou VK, Dreier T, Sandéhn A, Mohammadi M, Christensen JL, Tybrandt K, et al. Elucidating the Bulk Morphology of Cellulose‐Based Conducting Aerogels with X‐Ray Microtomography. Advanced Materials Technologies. 2023;8(23). doi:10.1002/admt.202300550

BibTeX
@article{Oikonomou2023,
  author = {Oikonomou, Vasileios K. and Dreier, Till and Sandéhn, Alexandra and Mohammadi, Mohsen and Christensen, Jakob Lønborg and Tybrandt, Klas and Dahl, Anders Bjorholm and Dahl, Vedrana Andersen and Bech, Martin and Stavrinidou, Eleni},
  title = {Elucidating the Bulk Morphology of Cellulose‐Based Conducting Aerogels with X‐Ray Microtomography},
  journal = {Advanced Materials Technologies},
  year = {2023},
  volume = {8},
  number = {23},
  doi = {10.1002/admt.202300550}
}
Kostenlos starten →