EUVIMEDEUVIMED entdecken
Crossref

Atomic Layer Deposition of Ultrathin Al 2 O 3 Layer on Carbon Nanotube Anodes for Potassium Ion Batteries with High Initial Coulombic Efficiency and Electrochemical Performance

Yun Wang, Ruishuai Wang, Hongzheng Zhu, Wenfeng Jiang, Jia Guo, Dong Yang, Liang Liu, Jian Liu

Advanced Materials Technologies · 2023-09 · 8 (17)

DOI: 10.1002/admt.202300435 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 05.05.2023. Verfasst von Yun Wang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: Natural Sciences and Engineering Research Council of Canada, Canada Foundation for Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Potassium ion batteries (PIBs) have emerged as one of the most attractive alternatives to lithium‐ion batteries (LIBs) to satisfy the burgeoning energy demand. The continuous growth of solid electrolyte interphase (SEI) and consumption of potassium resources cause poor initial Coulombic efficiency (ICE), unstable cycling performance, and even safety issues. Herein, the fabrication of an artificial SEI of an ultrathin Al 2 O 3 layer by atomic layer deposition (ALD) on a multi‐walled carbon nanotubes (MWCNTs) anode for high‐performance PIBs is reported. The SEI resistance and the charge transfer resistance in the MWCNTs electrode are significantly reduced according to electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration (GITT) measurements. The MWCNT electrode with a 2‐nm Al 2 O 3 layer exhibits a much higher ICE of up to 85.9% than that of the uncoated one (20.8 %). It also maintains a remarkably high reversible capacity of 284 mA h g −1 at 100 mA g −1 after 100 cycles. In particular, the anode delivers superior rate capability of 558, 303, 251, 203, and 154 mAh g −1 at a current density of 50, 100, 200, 400, and 800 mA g −1 , respectively. This work offers an effective approach for fabricating PIBs with high ICE and electrochemical performance.

Förderung

  • Natural Sciences and Engineering Research Council of Canada
  • Canada Foundation for Innovation

Zitieren

APA

Wang, Y., Wang, R., Zhu, H., Jiang, W., Guo, J., Yang, D., Liu, L., & Liu, J. (2023). Atomic Layer Deposition of Ultrathin Al 2 O 3 Layer on Carbon Nanotube Anodes for Potassium Ion Batteries with High Initial Coulombic Efficiency and Electrochemical Performance. Advanced Materials Technologies, 8(17). https://doi.org/10.1002/admt.202300435

Vancouver

Wang Y, Wang R, Zhu H, Jiang W, Guo J, Yang D, et al. Atomic Layer Deposition of Ultrathin Al 2 O 3 Layer on Carbon Nanotube Anodes for Potassium Ion Batteries with High Initial Coulombic Efficiency and Electrochemical Performance. Advanced Materials Technologies. 2023;8(17). doi:10.1002/admt.202300435

BibTeX
@article{Wang2023,
  author = {Wang, Yun and Wang, Ruishuai and Zhu, Hongzheng and Jiang, Wenfeng and Guo, Jia and Yang, Dong and Liu, Liang and Liu, Jian},
  title = {Atomic Layer Deposition of Ultrathin Al 2 O 3 Layer on Carbon Nanotube Anodes for Potassium Ion Batteries with High Initial Coulombic Efficiency and Electrochemical Performance},
  journal = {Advanced Materials Technologies},
  year = {2023},
  volume = {8},
  number = {17},
  doi = {10.1002/admt.202300435}
}
Kostenlos starten →