EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Flexible and Polymer‐Based Chemiresistive CO 2 Gas Sensor at Room Temperature

Zahra Shahrbabaki, Syamak Farajikhah, Mohammad B. Ghasemian, Farshad Oveissi, Ronil J. Rath, Jimmy Yun, Fariba Dehghani, Sina Naficy

Advanced Materials Technologies · 2023-05 · 8 (10)

DOI: 10.1002/admt.202201510 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 02.03.2023. Verfasst von Zahra Shahrbabaki und 7 weiteren Autor:innen. Die Arbeit wurde bisher 54-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council, University of Sydney.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CO 2 sensing is important in many applications ranging from air‐quality monitoring to food packaging. In this study, an amine‐functionalized copolymer, poly( N ‐[3‐(dimethylamino)propyl]‐methacrylamide‐ co ‐2‐ N ‐morpholinoethyl methacrylate) (p(D‐ co ‐M)) is synthesized, offering moderate basicity suitable for a wide CO 2 detection range. Taking advantage of this characteristic of p(D‐ co ‐M), this polymer is used for designing a chemiresistive, low‐cost, flexible, and reversible CO 2 sensor. The p(D‐ co ‐M)‐based sensors show a noticeable decrease in their direct current resistance and alternating current impedance upon exposure to a wide range of CO 2 concentration (1–100%) at room temperature with a response and a recovery time of 6 and 14 min, respectively. Additionally, the p(D‐ co ‐M)‐based sensors demonstrate a favorable selectivity to CO 2 in the presence of interfering gases including methanol, ethanol, toluene, and acetone. Surface potential measurements show an increase of +6.34 V upon exposure to humidity and CO 2 , indicating the protonation of the polymer's amine sites, facilitating the detection of CO 2 in the wet environment. This sensor is efficient for detecting CO 2 concentration released during fermentation of kimchi as a food model.

Förderung

  • Australian Research Council
  • University of Sydney

Zitieren

APA

Shahrbabaki, Z., Farajikhah, S., Ghasemian, M. B., Oveissi, F., Rath, R. J., Yun, J., Dehghani, F., & Naficy, S. (2023). A Flexible and Polymer‐Based Chemiresistive CO 2 Gas Sensor at Room Temperature. Advanced Materials Technologies, 8(10). https://doi.org/10.1002/admt.202201510

Vancouver

Shahrbabaki Z, Farajikhah S, Ghasemian MB, Oveissi F, Rath RJ, Yun J, et al. A Flexible and Polymer‐Based Chemiresistive CO 2 Gas Sensor at Room Temperature. Advanced Materials Technologies. 2023;8(10). doi:10.1002/admt.202201510

BibTeX
@article{Shahrbabaki2023,
  author = {Shahrbabaki, Zahra and Farajikhah, Syamak and Ghasemian, Mohammad B. and Oveissi, Farshad and Rath, Ronil J. and Yun, Jimmy and Dehghani, Fariba and Naficy, Sina},
  title = {A Flexible and Polymer‐Based Chemiresistive CO 2 Gas Sensor at Room Temperature},
  journal = {Advanced Materials Technologies},
  year = {2023},
  volume = {8},
  number = {10},
  doi = {10.1002/admt.202201510}
}
Kostenlos starten →