EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Gap‐Filling Stencil Lithography for Precise and High Yield Patterning of Two‐Dimensional Materials

Jaemin Myoung, Taehyeon Kim, Jeongin Song, Raewon Lee, Euna Jung, Byeonghyeon Min, Sihoon Son, Yoona Hwang, Seung‐Hun Lee, Eunyoung Lee, Seok‐ki Hyeong, Sang‐Woo Kang und 7 weitere

Advanced Materials Interfaces · 11.11.2026

DOI: 10.1002/admi.70732 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Interfaces, online erschienen am 11.11.2026. Verfasst von Jaemin Myoung und 18 weiteren Autor:innen. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, National Research Foundation of Korea, Korea Research Institute of Standards and Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Two‐dimensional materials (2DMs) are considered revolutionary candidates for manufacturing electronics because of their atomically thin nature and exceptional electrical properties. Lithography is essential for patterning 2DMs and fabricating electronic devices. However, conventional water‐based processes such as photolithography fail to achieve high‐yield production because of 2DM delamination from the substrate. Although non‐water‐based stencil lithography is an alternative, the inherent gap between the mask and substrate causes blurring, obscuring high‐precision definition. In this study, we present gap‐filling stencil lithography (GSL), which introduces a protective layer to eliminate this gap, thereby suppressing blurring and enabling precise patterning for 2DMs. Pattern arrays fabricated through multialignment GSL achieved an exceptional 100% yield, compared to the 79.2% yield obtained through photolithography. GSL was implemented on various 2DMs to validate its universality, demonstrating repeatability by maintaining consistent dimensions after consecutive GSL cycles without mask degradation. Finally, the electrical performance of edge‐contact field‐effect transistors fabricated using GSL was evaluated, which confirms GSL as a practical approach to manufacture electronic devices utilizing 2DM. Consequently, this GSL method is expected to emerge as a promising patterning candidate for 2DM because it can overcome the critical processing vulnerabilities of conventional lithography to ensure high‐yield production.

Förderung

  • Ministry of Trade, Industry and Energy
  • National Research Foundation of Korea
  • Korea Research Institute of Standards and Science

Zitieren

APA

Myoung, J., Kim, T., Song, J., Lee, R., Jung, E., Min, B., Son, S., Hwang, Y., Lee, S., Lee, E., Hyeong, S., Kang, S., Kim, D., Bae, S., Kim, J. H., Choi, M. S., Lee, J., Kim, T., & Mun, J. (2026). Gap‐Filling Stencil Lithography for Precise and High Yield Patterning of Two‐Dimensional Materials. Advanced Materials Interfaces. https://doi.org/10.1002/admi.70732

Vancouver

Myoung J, Kim T, Song J, Lee R, Jung E, Min B, et al. Gap‐Filling Stencil Lithography for Precise and High Yield Patterning of Two‐Dimensional Materials. Advanced Materials Interfaces. 2026. doi:10.1002/admi.70732

BibTeX
@article{Myoung2026,
  author = {Myoung, Jaemin and Kim, Taehyeon and Song, Jeongin and Lee, Raewon and Jung, Euna and Min, Byeonghyeon and Son, Sihoon and Hwang, Yoona and Lee, Seung‐Hun and Lee, Eunyoung and Hyeong, Seok‐ki and Kang, Sang‐Woo and Kim, Daehee and Bae, Sukang and Kim, Jeong Hwan and Choi, Min Sup and Lee, Jae‐Hyun and Kim, Taesung and Mun, Jihun},
  title = {Gap‐Filling Stencil Lithography for Precise and High Yield Patterning of Two‐Dimensional Materials},
  journal = {Advanced Materials Interfaces},
  year = {2026},
  doi = {10.1002/admi.70732}
}
Kostenlos starten →