EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rapid Electrothermal Heating and Molten Salt Etching to Produce Ti 3 C 2 MXenes

Savannah E. Pas, Ramu Banavath, Milos Dujovic, Miladin Radovic, Jodie L. Lutkenhaus, Micah J. Green

Advanced Materials Interfaces · 2025-11 · 12 (22)

DOI: 10.1002/admi.202500355 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Interfaces, online erschienen am 03.09.2025. Verfasst von Savannah E. Pas und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, Division of Civil, Mechanical and Manufacturing Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rapid, out‐of‐oven techniques for MXene synthesis are of great interest and would allow for easier production of this exciting class of 2D materials. MXenes are typically synthesized by etching MAX phases with strong acids for long times, sometimes exceeding 40 h. Electrothermal synthesis techniques can reduce the heating time of materials; here Joule heating with molten salt etching precursors is utilized to etch MAX phase into multilayered (ML) Ti 3 C 2 T x MXenes. An inert environment is used to etch the MAX phase in 30 min at 750–800 °C. SEM/EDS and XRD confirmed etching of the material. XPS, FTIR, and Raman are compared to conventional LiF‐HCl ML‐ Ti 3 C 2 T x , showing similar spectra to Joule heated ML‐Ti3C2Tx material. Most importantly, this new out‐of‐oven Ti 3 C 2 T x synthesis decreased etching time by 98% from molten salt etching and reduced energy usage from 1.56 × 10 7 to 1.01 × 10 6 J g −1 per batch, paving the way for the commercialization of MXene etching.

Förderung

  • National Science Foundation
  • Division of Civil, Mechanical and Manufacturing Innovation

Zitieren

APA

Pas, S. E., Banavath, R., Dujovic, M., Radovic, M., Lutkenhaus, J. L., & Green, M. J. (2025). Rapid Electrothermal Heating and Molten Salt Etching to Produce Ti 3 C 2 MXenes. Advanced Materials Interfaces, 12(22). https://doi.org/10.1002/admi.202500355

Vancouver

Pas SE, Banavath R, Dujovic M, Radovic M, Lutkenhaus JL, Green MJ. Rapid Electrothermal Heating and Molten Salt Etching to Produce Ti 3 C 2 MXenes. Advanced Materials Interfaces. 2025;12(22). doi:10.1002/admi.202500355

BibTeX
@article{Pas2025,
  author = {Pas, Savannah E. and Banavath, Ramu and Dujovic, Milos and Radovic, Miladin and Lutkenhaus, Jodie L. and Green, Micah J.},
  title = {Rapid Electrothermal Heating and Molten Salt Etching to Produce Ti 3 C 2 MXenes},
  journal = {Advanced Materials Interfaces},
  year = {2025},
  volume = {12},
  number = {22},
  doi = {10.1002/admi.202500355}
}
Kostenlos starten →