EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Controlled Engineering of Defects and Interfaces in Thermoelectric Materials With Atomic Layer Deposition

Gwang Min Park, Seunghyeok Lee, Tae Joo Park, Seung‐Hyub Baek, Jin‐Sang Kim, Seong Keun Kim

Advanced Materials Interfaces · 2025-02 · 12 (3)

DOI: 10.1002/admi.202400581 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Interfaces, online erschienen am 31.10.2024. Verfasst von Gwang Min Park und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 157 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Enhancing the performance of thermoelectric materials remains critical for practical applications. Increasing the power factor and reducing the thermal conductivity are key strategies for improving the thermoelectric performance. Doping, incorporating secondary phases, and generating dislocations can be used to introduce defects and grain boundaries to improve the thermoelectric performance. The application of an ultrathin film as a coating on thermoelectric materials via atomic layer deposition (ALD) has recently attracted attention as a novel approach to enhance the performance. The excellent conformality of ALD enables the conformal deposition of ultrathin films on powder to enable the interfacial properties to be meticulously controlled even after sintering. Using ALD to deposit an ultrathin layer on the thermoelectric powder matrix induces various defects through the interactions of the coating material with the thermoelectric matrix, which provide exquisite control over the material properties. This review discusses the phenomena induced by applying ultrathin coatings to thermoelectric materials through ALD, elucidates the underlying mechanisms, and examines the effects on the thermoelectric performance. Based on these insights, innovative pathways for applying ALD to thermoelectric materials are proposed, and robust strategies for enhancing these properties through the precise modulation of diverse defects and interfaces are discussed.

Förderung

  • Korea Institute of Science and Technology

Zitieren

APA

Park, G. M., Lee, S., Park, T. J., Baek, S., Kim, J., & Kim, S. K. (2025). Controlled Engineering of Defects and Interfaces in Thermoelectric Materials With Atomic Layer Deposition. Advanced Materials Interfaces, 12(3). https://doi.org/10.1002/admi.202400581

Vancouver

Park GM, Lee S, Park TJ, Baek S, Kim J, Kim SK. Controlled Engineering of Defects and Interfaces in Thermoelectric Materials With Atomic Layer Deposition. Advanced Materials Interfaces. 2025;12(3). doi:10.1002/admi.202400581

BibTeX
@article{Park2025,
  author = {Park, Gwang Min and Lee, Seunghyeok and Park, Tae Joo and Baek, Seung‐Hyub and Kim, Jin‐Sang and Kim, Seong Keun},
  title = {Controlled Engineering of Defects and Interfaces in Thermoelectric Materials With Atomic Layer Deposition},
  journal = {Advanced Materials Interfaces},
  year = {2025},
  volume = {12},
  number = {3},
  doi = {10.1002/admi.202400581}
}
Kostenlos starten →