Atomic Layer Deposition of Molybdenum Carbide Thin Films
Advanced Materials Interfaces · 2024-09 · 11 (26)
DOI: 10.1002/admi.202400270 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Interfaces, 2024-07. Verfasst von Paloma Ruiz Kärkkäinen und 16 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 96 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Council of Finland, Horizon 2020 Framework Programme, CSC – IT Center for Science.
Abstract (Originalsprache)
The development of deposition processes for metal carbide thin films is rapidly advancing, driven by their potential for applications including catalysis, batteries, and semiconductor devices. Within this landscape, atomic layer deposition (ALD) offers exceptional conformality, uniformity, and thickness control on spatially complex structures. This paper presents a comprehensive study on the thermal ALD of MoC x with MoCl 5 and 1,4‐bis(trimethylgermyl)‐1,4‐dihydropyrazine [(Me 3 Ge) 2 DHP] as precursors, focusing on the functional properties and characterization of the films. The depositions are conducted at 200–300 °C and very smooth films with RMS Rq ≈0.3–0.6 nm on Si, TiN, and HfO 2 substrates are obtained. The process has a high growth rate of 1.5 Å cycle −1 and the films appear to be continuous already after 5 cycles. The films are conductive even at thicknesses below 5 nm, and films above 18 nm exhibit superconductivity up to 4.4 K. In lieu of suitable references, Raman modes for molybdenum carbides and nitrides are calculated and X‐ray diffraction and X‐ray photoelectron spectroscopy are used for phase analysis.
Förderung
- Research Council of Finland
- Horizon 2020 Framework Programme
- CSC – IT Center for Science
Zitieren
APA
Kärkkäinen, P. R., Popov, G., Hatanpää, T., Kemppinen, A., Kohopää, K., Bagheri, M., Komsa, H., Heikkilä, M., Mizohata, K., Chundak, M., Deminskyi, P., Vihervaara, A., Ribeiro, M., Hätinen, J., Govenius, J., Putkonen, M., & Ritala, M. (2024). Atomic Layer Deposition of Molybdenum Carbide Thin Films. Advanced Materials Interfaces, 11(26). https://doi.org/10.1002/admi.202400270
Vancouver
Kärkkäinen PR, Popov G, Hatanpää T, Kemppinen A, Kohopää K, Bagheri M, et al. Atomic Layer Deposition of Molybdenum Carbide Thin Films. Advanced Materials Interfaces. 2024;11(26). doi:10.1002/admi.202400270
BibTeX
@article{Krkkinen2024,
author = {Kärkkäinen, Paloma Ruiz and Popov, Georgi and Hatanpää, Timo and Kemppinen, Antti and Kohopää, Katja and Bagheri, Mohammad and Komsa, Hannu‐Pekka and Heikkilä, Mikko and Mizohata, Kenichiro and Chundak, Mykhailo and Deminskyi, Petro and Vihervaara, Anton and Ribeiro, Mário and Hätinen, Joel and Govenius, Joonas and Putkonen, Matti and Ritala, Mikko},
title = {Atomic Layer Deposition of Molybdenum Carbide Thin Films},
journal = {Advanced Materials Interfaces},
year = {2024},
volume = {11},
number = {26},
doi = {10.1002/admi.202400270}
}
EUVIMED