Compositional Modification of Epitaxial Pb(Zr,Ti)O 3 Thin Films for High‐Performance Piezoelectric Energy Harvesters
Advanced Materials Interfaces · 2024-01 · 11 (2)
DOI: 10.1002/admi.202300634 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Interfaces, online erschienen am 27.10.2023. Verfasst von Sang Hyo Kweon und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Japan Science and Technology Corporation.
Abstract (Originalsprache)
In this study, Piezoelectric energy harvesters (PEHs) are fabricated based on epitaxial Pb(Zr,Ti)O 3 (PZT) thin films deposited by an RF magnetron sputtering with varied Zr/[Zr+Ti] ratio. For a compatibility with micro‐electromechanical systems, the epitaxial PZT thin films are deposited on Si substrates (PZT/Si). The morphotropic phase boundary (MPB) are formed in the compositional range of 0.44 ≤ Zr/[Zr+Ti] ≤ 0.51 of the epitaxial PZT/Si, which is far broader than that of the bulk PZT. Meanwhile, effective transverse piezoelectric coefficient (| e 31,f |) values are evaluated by the direct and converse piezoelectric effects using the unimorph cantilever method. Among the compositions, the rhombohedral‐dominant MPB (MPB‐R) of Zr/[Zr+Ti] = 0.51 exhibits a direct | e 31,f | of 10.1 C m −2 and a relative permittivity ( ε r ) of 285, leading to the maximum figure of merit of 40 GPa in this study. On the other hand, the maximum converse | e 31,f | of 14.0 C m −2 is measured from the tetragonal‐dominant MPB (MPB‐T) of Zr/[Zr+Ti] = 0.44. At a resonance frequency, the MPB‐T presents a high output power density of 301.5 µW −1 /(cm 2 g 2 ) under an acceleration of 3 m −1 s −2 , which is very promising for the high‐performance PEH applications.
Förderung
- Japan Science and Technology Corporation
Zitieren
APA
Kweon, S. H., Kim, E., Tan, G., & Kanno, I. (2024). Compositional Modification of Epitaxial Pb(Zr,Ti)O 3 Thin Films for High‐Performance Piezoelectric Energy Harvesters. Advanced Materials Interfaces, 11(2). https://doi.org/10.1002/admi.202300634
Vancouver
Kweon SH, Kim E, Tan G, Kanno I. Compositional Modification of Epitaxial Pb(Zr,Ti)O 3 Thin Films for High‐Performance Piezoelectric Energy Harvesters. Advanced Materials Interfaces. 2024;11(2). doi:10.1002/admi.202300634
BibTeX
@article{Kweon2024,
author = {Kweon, Sang Hyo and Kim, Eun‐Ji and Tan, Goon and Kanno, Isaku},
title = {Compositional Modification of Epitaxial Pb(Zr,Ti)O 3 Thin Films for High‐Performance Piezoelectric Energy Harvesters},
journal = {Advanced Materials Interfaces},
year = {2024},
volume = {11},
number = {2},
doi = {10.1002/admi.202300634}
}
EUVIMED