Investigation of the Stability of the Poly(ethylene oxide)|LiNi 1‐x‐y Co x Mn y O 2 Interface in Solid‐State Batteries
Advanced Materials Interfaces · 2024-01 · 11 (3)
DOI: 10.1002/admi.202300532 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Interfaces, online erschienen am 27.11.2023. Verfasst von Yuriy Yusim und 6 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Bildung und Forschung, Helmholtz Association, Deutsche Forschungsgemeinschaft.
Abstract (Originalsprache)
While solid‐state batteries (SSBs) comprising poly(ethylene oxide) (PEO) based electrolytes are successfully commercialized already for operation at elevated temperature, the selection of the cathode active material (CAM) has so far been limited to LiFePO 4 . When using high‐voltage CAMs such as LiNi 1‐ x ‐ y Co x Mn y O 2 (NCM), the cells experience fast capacity fading – the cause of which is not consistently understood in literature. In this study, electrochemical impedance spectroscopy measurements in a three‐electrode setup are applied to confirm that the NCM|PEO interface is indeed the Achilles' heel in PEO‐based SSBs at high voltages. In this regard, the interfacial stability on the cathode side depends not only on the upper cut‐off voltage, but also on the molecular weight of PEO, strongly affecting the cell performance. Scanning electron microscopy images of the cathodes after cycling suggest that at high voltages interfacial degradation leads to fragmentation of the polymer backbone and to a decrease in viscosity of the solid polymer electrolyte. Overall, the results help to understand the detrimental processes occurring in PEO‐based SSBs in combination with high‐voltage cathodes.
Förderung
- Bundesministerium für Bildung und Forschung
- Helmholtz Association
- Deutsche Forschungsgemeinschaft
Zitieren
APA
Yusim, Y., Hunstock, D. F., Mayer, A., Bresser, D., Passerini, S., Janek, J., & Henss, A. (2024). Investigation of the Stability of the Poly(ethylene oxide)|LiNi 1‐x‐y Co x Mn y O 2 Interface in Solid‐State Batteries. Advanced Materials Interfaces, 11(3). https://doi.org/10.1002/admi.202300532
Vancouver
Yusim Y, Hunstock DF, Mayer A, Bresser D, Passerini S, Janek J, et al. Investigation of the Stability of the Poly(ethylene oxide)|LiNi 1‐x‐y Co x Mn y O 2 Interface in Solid‐State Batteries. Advanced Materials Interfaces. 2024;11(3). doi:10.1002/admi.202300532
BibTeX
@article{Yusim2024,
author = {Yusim, Yuriy and Hunstock, Dirk F. and Mayer, Alexander and Bresser, Dominic and Passerini, Stefano and Janek, Jürgen and Henss, Anja},
title = {Investigation of the Stability of the Poly(ethylene oxide)|LiNi 1‐x‐y Co x Mn y O 2 Interface in Solid‐State Batteries},
journal = {Advanced Materials Interfaces},
year = {2024},
volume = {11},
number = {3},
doi = {10.1002/admi.202300532}
}
EUVIMED