EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Strong Photocurrent from Solution‐Processed Ruddlesden–Popper 2D Perovskite–MoS 2 Hybrid Heterojunctions

Rashid M. Ansari, Akshaykumar D. Salunke, Mohammad Rahil, Shahab Ahmad

Advanced Materials Interfaces · 2023-04 · 10 (10)

DOI: 10.1002/admi.202202170 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Interfaces, online erschienen am 25.02.2023. Verfasst von Rashid M. Ansari und 3 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Engineering Research Board, Department of Science and Technology, Ministry of Science and Technology, India.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study reports overall improvement in structural, morphological, and optoelectronic properties of Ruddlesden–Popper (RP) perovskites of type (BA) 2 (MA) n −1 Pb n I 3 n +1 by forming their bulk heterojunction hybrids with few‐layer MoS 2 nanoflakes. RP perovskite–MoS 2 hybrid thin films have shown significantly improved packing and crystallinity compared to pristine perovskites. The presence of MoS 2 at RP perovskite interface has improved the quantum confinement effects and transport of photogenerated charge carriers from perovskite to MoS 2 , due to suitable conduction band of MoS 2 and more number of decay channels. The optoelectronic properties of RP perovskite–MoS 2 hybrids are studied for various MoS 2 concentrations (4.2–25.6 × 10 −3 m ) and at optimum concentration (12.8 × 10 −3 m ) the photodetectors ( n = 2, 4) have shown strong, sharp, and highly stable photocurrent response. At 0.0 V bias, the RP perovskite ( n = 4) and MoS 2 (12.8 × 10 −3 m ) hybrid‐based photodetectors, prepared without any encapsulation, have shown strong photocurrent density of ≈9.8 µA cm −2 under 1 sun illumination, which is ≈17 times higher compared to the pristine RP perovskites‐based photodetector (0.6 µA cm −2 ). Further transient photocurrent, performed over 200 cycles for hybrid ( n = 4+MoS 2 ) thin film photodetector under laser (λ ex ≈ 405 nm, ≈630 mW cm −2 ) illumination and ambient air conditions has shown highly stable photocurrent with only ≈9.6% reduction in the peak photocurrent density.

Förderung

  • Science and Engineering Research Board
  • Department of Science and Technology, Ministry of Science and Technology, India

Zitieren

APA

Ansari, R. M., Salunke, A. D., Rahil, M., & Ahmad, S. (2023). Strong Photocurrent from Solution‐Processed Ruddlesden–Popper 2D Perovskite–MoS 2 Hybrid Heterojunctions. Advanced Materials Interfaces, 10(10). https://doi.org/10.1002/admi.202202170

Vancouver

Ansari RM, Salunke AD, Rahil M, Ahmad S. Strong Photocurrent from Solution‐Processed Ruddlesden–Popper 2D Perovskite–MoS 2 Hybrid Heterojunctions. Advanced Materials Interfaces. 2023;10(10). doi:10.1002/admi.202202170

BibTeX
@article{Ansari2023,
  author = {Ansari, Rashid M. and Salunke, Akshaykumar D. and Rahil, Mohammad and Ahmad, Shahab},
  title = {Strong Photocurrent from Solution‐Processed Ruddlesden–Popper 2D Perovskite–MoS 2 Hybrid Heterojunctions},
  journal = {Advanced Materials Interfaces},
  year = {2023},
  volume = {10},
  number = {10},
  doi = {10.1002/admi.202202170}
}
Kostenlos starten →