2D Mo 2 CT x Reinforced Polyimide Nanocomposites for Enhancement of Surface Tribological Performance at Elevated Temperatures
Advanced Materials Interfaces · 2023-03 · 10 (7)
DOI: 10.1002/admi.202201563 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials Interfaces, online erschienen am 23.01.2023. Verfasst von Haonan Li und 7 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Engineering and Physical Sciences Research Council.
Abstract (Originalsprache)
In order to improve the high‐temperature friction and wear properties of polyimide (PI), Mo 2 CT x /PI nanocomposite materials are prepared by using 2D Mo 2 CT x MXene as reinforcement. Compared with the properties of pure PI, Mo 2 CT x /PI nanocomposites exhibit significant improvement on thermal stability, hardness, and tribological performance. Especially, the addition of Mo 2 CT x can reduce friction coefficient and wear rate of PI significantly at different temperatures ranging from room temperature (RT) to 200 °C. The hardness and the thermo‐degradation temperature of composites increase due to the formation of an organic inorganic structure. In addition, this structure helps to form a protective film containing Mo 2 CT x nanoflakes, iron oxide, molybdenum oxide, and organic compounds during friction, and improve the tribological properties of PI composite.
Förderung
- National Natural Science Foundation of China
- Engineering and Physical Sciences Research Council
Zitieren
APA
Li, H., Wang, L., Li, L., Li, H., Dai, Y., Hu, Q., Zhou, A., & Liu, X. (2023). 2D Mo 2 CT x Reinforced Polyimide Nanocomposites for Enhancement of Surface Tribological Performance at Elevated Temperatures. Advanced Materials Interfaces, 10(7). https://doi.org/10.1002/admi.202201563
Vancouver
Li H, Wang L, Li L, Li H, Dai Y, Hu Q, et al. 2D Mo 2 CT x Reinforced Polyimide Nanocomposites for Enhancement of Surface Tribological Performance at Elevated Temperatures. Advanced Materials Interfaces. 2023;10(7). doi:10.1002/admi.202201563
BibTeX
@article{Li2023,
author = {Li, Haonan and Wang, Libo and Li, Liang and Li, Han and Dai, Yahui and Hu, Qianku and Zhou, Aiguo and Liu, Xuqing},
title = {2D Mo 2 CT x Reinforced Polyimide Nanocomposites for Enhancement of Surface Tribological Performance at Elevated Temperatures},
journal = {Advanced Materials Interfaces},
year = {2023},
volume = {10},
number = {7},
doi = {10.1002/admi.202201563}
}
EUVIMED