Stage‐Specific Pressure Programming Decouples Low‐Pressure Sulfur Reduction From High‐Pressure Interfacial Reconstruction in All‐Solid‐State Lithium–Sulfur Batteries
Advanced Materials · 18.11.2026
DOI: 10.1002/adma.75779 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 18.11.2026. Verfasst von Yating Zhang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Institute of New Energy Material Chemistry, School of Materials Science and Engineering, Nankai University, Tianjin, China. Die Arbeit nennt 34 Literaturangaben. Gefördert von: National Natural Science Foundation of China, TCL Science and Technology Innovation Fund, Foundation of National Key Laboratory of Chemical and Physical Power Sources.
Abstract (Originalsprache)
The commercialization of all‐solid‐state Li–S batteries (ASSLSBs) remains constrained by the “impossible trinity” between high energy density, long cycle life, and low stack pressure. Here we show that stack pressure is not merely a static mechanical boundary, but a stage‐specific regulator of sulfur conversion and interfacial reconstruction. Using a static pressure‐resistance‐overpotential (P‐R‐η) operational threshold algorithm, low‐stack‐pressure operation is predicted feasible for 50 wt% S cathodes. Further operando electrochemical measurements and multiscale chemical and structural characterizations reveal that 1 MPa discharge promotes Li 2 S 2 ‐rich interfacial intermediates. However, constant low‐pressure cycling induces progressive pore filling that prolongs charge transport pathways, leading to inactive Li X S accumulation and triphase interfacial contact losses. State‐resolved very‐small‐angle neutron scattering (VSANS) further uncovers a ∼5 nm structural feature that persists after low‐stack‐pressure discharge, which specifically diminishes upon high‐pressure charging. Guided by this mechanism, we implement a pressure‐programmed protocol combining 1 MPa discharge with 180 MPa charge. The resulting cell retains 98.8% of capacity after 100 cycles at 30 °C. This work establishes a dynamic pressure modulation strategy towards alleviating the “impossible trinity” by decoupling the asymmetric pressure‐electrochemical behaviors.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of New Energy Material Chemistry, School of Materials Science and Engineering, Nankai University, Tianjin, China.
- Spallation Neutron Source Science Center, Dongguan, China.
- Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, China.
ORCID-Profile: Yuan Jiang, Likun Zhou, Taisen Zuo, Peng Chen, Xueping Gao
Förderung
- National Natural Science Foundation of China
- TCL Science and Technology Innovation Fund
- Foundation of National Key Laboratory of Chemical and Physical Power Sources
- Basic and Applied Basic Research Foundation of Guangdong Province
Zitieren
APA
Zhang, Y., Hou, Z., Jiang, Y., Gao, R., Zhou, L., Bi, Z., Zhao, C., Zuo, T., Cheng, H., Chen, P., & Gao, X. (2026). Stage‐Specific Pressure Programming Decouples Low‐Pressure Sulfur Reduction From High‐Pressure Interfacial Reconstruction in All‐Solid‐State Lithium–Sulfur Batteries. Advanced Materials. https://doi.org/10.1002/adma.75779
Vancouver
Zhang Y, Hou Z, Jiang Y, Gao R, Zhou L, Bi Z, et al. Stage‐Specific Pressure Programming Decouples Low‐Pressure Sulfur Reduction From High‐Pressure Interfacial Reconstruction in All‐Solid‐State Lithium–Sulfur Batteries. Advanced Materials. 2026. doi:10.1002/adma.75779
BibTeX
@article{Zhang2026,
author = {Zhang, Yating and Hou, Zhongjun and Jiang, Yuan and Gao, Rui and Zhou, Likun and Bi, Zixuan and Zhao, Chen and Zuo, Taisen and Cheng, He and Chen, Peng and Gao, Xueping},
title = {Stage‐Specific Pressure Programming Decouples Low‐Pressure Sulfur Reduction From High‐Pressure Interfacial Reconstruction in All‐Solid‐State Lithium–Sulfur Batteries},
journal = {Advanced Materials},
year = {2026},
doi = {10.1002/adma.75779}
}
EUVIMED